Clark Heavy Long Slide 45 ACP

Go down

Clark Heavy Long Slide 45 ACP

Post by albertrichard123 on 10/16/2018, 3:46 pm

This was built in Jan 1980 while Clark was in Keithville, LA 

The pistol is made by welding a 1" section of a slide to the front of a commercial Government Model Colt .45, as the basic gun. A special Clark barrel is fitted and the gun is completely accurized. A 6" BO-MAR Low Profile Rib with an Accuracy Tuner adds weight for lighter recoil and faster recovery.The pistol is then tested for accuracy firing 10 shots at 50 yards, a copy of this test is included when the pistol is shipped,  I've owned 2 long slides and the targets were well within the 10 ring, usually 1.5 to 2.0". Clark's stated accuracy guarantee is 2.5"  (...all per (Clark Custom Target Pistol catalogs ) I am selling this pistol for the son of the original owner, unfortunately the test target has been lost.


The price is $1800 + shipping, cashiers check or postal order,payable to A. R. Harris ,send to 515 E-Bullard Ave .       # 120,Fresno, CA 93710.

To move ahead ...using my email address.... send the address of your FFL along with a singed copy of his licence , the pistol will be taken to UPS for quote for shipping and insurance . I will then send an email showing the total for pistol and sipping,upon receipt of payment all will be packaged and shipped with tracking number.

Note: this has sold several days, shipped Friday last.

(revised date: 10-19-2018)   NOTE:THIS HAS been sold, PENDING PAYMENT!


Last edited by albertrichard123 on 10/28/2018, 8:01 am; edited 5 times in total

albertrichard123

Posts : 125
Join date : 2012-05-17
Location : Fresno, CA 93710

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Baydawg on 10/16/2018, 4:08 pm

You forgot a price
avatar
Baydawg

Posts : 92
Join date : 2017-10-28

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Wobbley on 10/16/2018, 4:20 pm

If you have to ask....you probably can’t afford it
avatar
Wobbley

Posts : 1674
Join date : 2015-02-12

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Jon Eulette on 10/16/2018, 4:54 pm

Can you provide the Price?
Can you show a picture of the top of the barrel showing that it is a 2-piece barrel (Douglas stubbed into another barrel)?
Thanks
Jon
avatar
Jon Eulette

Posts : 2182
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by dronning on 10/16/2018, 5:08 pm

Wobbley wrote:If you have to ask....you probably can’t afford it
Rules are rules:
"Include the asking price of the item for sale."
- Dave
avatar
dronning

Posts : 1913
Join date : 2013-03-20
Age : 65
Location : Lakeville, MN

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by albertrichard123 on 10/16/2018, 5:16 pm

This post has been revised as show above with the revision date of 10-19-2018                                                       I


Last edited by albertrichard123 on 10/19/2018, 9:25 am; edited 1 time in total

albertrichard123

Posts : 125
Join date : 2012-05-17
Location : Fresno, CA 93710

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Multiracer on 10/16/2018, 6:00 pm

You STILL forgot the price.....

Multiracer

Posts : 580
Join date : 2017-03-15
Location : North Ohio

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Jon Eulette on 10/16/2018, 6:02 pm

Price is on the other post. He has two post.
Jon
avatar
Jon Eulette

Posts : 2182
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Chris Miceli on 10/16/2018, 6:39 pm

Holy triple post
avatar
Chris Miceli

Posts : 2671
Join date : 2015-10-27
Location : Northern Virginia

Back to top Go down

Clark Heavy Long Slide 45 ACP info

Post by albertrichard123 on 10/17/2018, 9:38 am

Jon Eulette wrote:Can you provide the Price?
Can you show a picture of the top of the barrel showing that it is a 2-piece barrel (Douglas stubbed into another barrel)?
Thanks
Jon
Price is $1800 + shipping'
will check the barrel when the owner returns the pistol to me,what should I be looking for?

arh

albertrichard123

Posts : 125
Join date : 2012-05-17
Location : Fresno, CA 93710

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Jon Eulette on 10/17/2018, 10:16 am

In your original post you stated that it had a Douglas barrel. If it does have a Douglas barrel that means that Clark used a Douglas barrel blank and fit it to a existing 45 barrel chamber . So it will have a line around the forward edge  of the chamber area just behind the upper lug Where they were machined to fit each other. And if you look at the feed ramp on the barrel you will see a circular line where the Douglas barrel is the inner chamber and the existing barrel is the outer portion around it. It is typically silver soldered so you might see silver Solder coloring. Thank you I appreciate it.
Jon
avatar
Jon Eulette

Posts : 2182
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

Clark Heavy Long Slide 45 ACP

Post by albertrichard123 on 10/17/2018, 1:56 pm

Jon Eulette: don't see any of the marks you list in your email, have pictures but not sure i can attach 

them to this reply. if you can send me your email address I can send them with no problem, my 

address is: ardickharris1@sbcglobal.net

arh in California

albertrichard123

Posts : 125
Join date : 2012-05-17
Location : Fresno, CA 93710

Back to top Go down

Clark Heavy Long Slide 45 ACP

Post by albertrichard123 on 10/17/2018, 7:01 pm

Your question about Douglas barrel ....

Did you see my reply? don't see anything matching what you describe.

Again: will send pictures taken this morning, but need your email address to send the pics.

I'm confused is a Douglas barrel good or bad? You seem to know about these things.I would like to hear what you say after I send pics,

I can tell you this, the barrel is not "ramped", but is 'standard". based on drawing in a very early Clark catalog I have,

and sure appears to be one piece, again send your email address and I'll send some pictures, need to get this straight 

as I may need to make changes to my BE post.  arh

albertrichard123

Posts : 125
Join date : 2012-05-17
Location : Fresno, CA 93710

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Jon Eulette on 10/17/2018, 7:20 pm

I sent an email earlier today for photos. After I see the photos I’ll comment.
Thanks
Jon
avatar
Jon Eulette

Posts : 2182
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by albertrichard123 on 10/18/2018, 9:21 am

I see no way to attach pictures to this page,  if you can send your email address, attaching pictures is easy to do. I sent pictures yesterday but apparently they were not received.

ardickharris1@sbcglobal.net

albertrichard123

Posts : 125
Join date : 2012-05-17
Location : Fresno, CA 93710

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Jon Eulette on 10/18/2018, 9:32 am

joneulette@hotmail.com
Thanks
Jon
avatar
Jon Eulette

Posts : 2182
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Jon Eulette on 10/18/2018, 4:46 pm

Dick sent me some photos. The barrel is most likely in-house fabricated one piece barrel; no two piece seam, nor welded hood and bottom lugs. No markings on the chamber. I personally have not seen one like this by Clark so it is on the rarer side. I’ve seen S&W MTU barrels and two piece Colt/Douglas barrels. The pistol is a Series 70. 
If you are looking for a Clark Longslide this would be a premier purchase; like new in box, one piece custom barrel, and doesn’t have the screws on the dust cover for lock up. I would personally buy it if I didn’t just buy several others Wink
Jon
avatar
Jon Eulette

Posts : 2182
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by spursnguns on 10/18/2018, 5:51 pm

Hello albertrichard123,

Are you interested in any trades?

Jim
avatar
spursnguns

Posts : 317
Join date : 2013-01-04
Age : 60
Location : Gilroy, California

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by albertrichard123 on 10/18/2018, 6:06 pm

Jim: No, we are downsizing not expanding, my gun is new in the box at $1800 +shipping, if this doesn't fit for you there are 4-5 on Gun Broker,one of them might work for you. check them out,

arh in Fresno, CA

albertrichard123

Posts : 125
Join date : 2012-05-17
Location : Fresno, CA 93710

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by kjanracing on 10/18/2018, 10:03 pm

Pm sent. I’ll take it. 
Kurt
avatar
kjanracing

Posts : 188
Join date : 2015-02-17
Location : Arvada, Colorado

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by albertrichard123 on 10/19/2018, 12:49 am

Kurt:just got in from a 3 hour meeting, call me tomorrow on my cell,the number is: 559-540-5826 
albertrichard123    aka: Dick Harris

albertrichard123

Posts : 125
Join date : 2012-05-17
Location : Fresno, CA 93710

Back to top Go down

Re: Clark Heavy Long Slide 45 ACP

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum