Clays Hardball load recipe?

View previous topic View next topic Go down

Clays Hardball load recipe?

Post by Bullseye58 on Thu Nov 07, 2013 2:23 pm

Hi all; Anyone use Clays powder for their hardball loads for EIC? If so, I am looking for a starting point (maybe 4.2 grains?). I use Zero 230's, SL brass and WIN LP. Thanks in advance!

Bullseye58

Posts : 43
Join date : 2012-05-25

Back to top Go down

Re: Clays Hardball load recipe?

Post by DeweyHales on Thu Nov 07, 2013 4:44 pm

4.2 is what I have always heard.  It sounds like you are good to go.

DeweyHales

Posts : 578
Join date : 2011-06-10
Location : North Carolina

Back to top Go down

Re: Clays Hardball load recipe?

Post by Bullseye58 on Thu Nov 07, 2013 5:38 pm

Thanks Mr. Hales.

Bullseye58

Posts : 43
Join date : 2012-05-25

Back to top Go down

Re: Clays Hardball load recipe?

Post by spursnguns on Thu Nov 07, 2013 6:45 pm

Hello Bullseye58,

One of my favorite loads....


  • Starline or ASYM brass
  • Winchester LP primer
  • 4.2 grains of CLAYS
  • Nosler or Hornady 230 grains hardball

It should clock out at around 760 feet per second.

It is a soft shooting and very accurate load.

Good luck.

Jim

spursnguns

Posts : 188
Join date : 2013-01-04
Age : 58
Location : Gilroy, California

Back to top Go down

Re: Clays Hardball load recipe?

Post by Bullseye58 on Fri Nov 08, 2013 10:35 am

Thanks Jim; do you seat @ approx 1.260?

Bullseye58

Posts : 43
Join date : 2012-05-25

Back to top Go down

Re: Clays Hardball load recipe?

Post by spursnguns on Fri Nov 08, 2013 8:29 pm

Hello Bullseye58,

I normally shoot for between 1.265" and 1.270".  I find that for hardball loads; consistancy of length is more inportant than the exact dimension.

Jim

spursnguns

Posts : 188
Join date : 2013-01-04
Age : 58
Location : Gilroy, California

Back to top Go down

Re: Clays Hardball load recipe?

Post by Sponsored content Today at 6:10 pm


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum