Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Tools for gun work?

+6
Jerry Keefer
Jack H
DavidR
JayhawkNavy02
rob5r
beeser
10 posters

Go down

Tools for gun work? Empty Tools for gun work?

Post by beeser Thu Jan 01, 2015 9:41 pm

In order to make my reloading room more functional and useful I thought it might be a good idea to stock it with some tools specific to gun maintenance.  Any suggestions on types, brands, etc?  When it comes to tools I generally don't quibble about cost and appreciate quality.  No offense to anyone but stuff made in China is a real turn off to me.  I suspect a good screwdriver set specific for use on guns should be first on the list.

beeser

Posts : 1119
Join date : 2014-06-19

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by rob5r Thu Jan 01, 2015 9:46 pm

Look at the Brownells website.  Their screwdrivers work great.
rob5r
rob5r

Posts : 50
Join date : 2012-01-13
Location : Newport News, VA

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by JayhawkNavy02 Thu Jan 01, 2015 10:01 pm

I'm no gunsmith, but I do like having a set of punches for disassembly/assembly duties.  Both steel and brass.  I picked up my steel roll and pin punches at Sears and they seem decent enough for my limited use.

http://www.brownells.com/gunsmith-tools-supplies/general-gunsmith-tools/punches/brass-punch-set-prod6741.aspx

http://www.brownells.com/gunsmith-tools-supplies/general-gunsmith-tools/hammers/gunsmith-s-brass-hammers-prod6737.aspx
JayhawkNavy02
JayhawkNavy02

Posts : 821
Join date : 2014-03-01
Age : 45
Location : San Diego

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by DavidR Fri Jan 02, 2015 12:19 pm

brownells sells a 1911 kit that has everything you need,
http://www.brownells.com/gunsmith-tools-supplies/general-gunsmith-tools/gunsmithing-tool-kits/1911-armorer-s-tool-kit-prod19735.aspx
DavidR
DavidR
Admin

Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by Jack H Fri Jan 02, 2015 1:47 pm

Go first class and get Snapon electronic screwdrivers.  they fir gun screws perfectly.
Jack H
Jack H

Posts : 2635
Join date : 2011-06-10
Age : 74
Location : Oregon

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by Jerry Keefer Fri Jan 02, 2015 5:10 pm

In over 50 years, I have tried a lot of different tools. As far as screwdriver sets, I am presently using the Master Wheeler Set, and I like it best, so far.. I have over the years, amassed well into six figures in tooling and machines.. You will never likely have it all..I don't and just ordered some more today..
SmileSmile
Jerry Keefer
Jerry Keefer

Posts : 1001
Join date : 2012-01-02
Location : Maidens, VA

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by Guest Fri Jan 02, 2015 5:42 pm

Are others having good luck receiving what they order from Brownells?  I have a set of files I ordered in early July that are STILL on back order.

Guest
Guest


Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by beeser Fri Jan 02, 2015 6:11 pm

Jerry Keefer wrote:In over 50 years, I have tried a lot of different tools. As far as screwdriver sets, I am presently using the Master Wheeler Set, and I like it best, so far.. I have over the years, amassed well into six figures in tooling and machines.. You will never likely have it all..I don't and just ordered some more today..
SmileSmile
Agreed on never having enough tools but based on what I've seen (pics) of Jerry's shop and his quality tools I'm surprised of the "Master Wheeler Set" mention.  I don't have any of Wheeler Engineering tools but it's my impression that the gunsmithing screwdriver sets are made in China.  And I've never seen a quality built tool made in China.

Borrowing from the ideas of DavidR and Jack H I'll probably begin to piece together my own collection of tools based on what is shown in the Brownell kit.  My first purchase will probably be a Snap-on screwdriver set or something equivalent.

beeser

Posts : 1119
Join date : 2014-06-19

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by Guest Fri Jan 02, 2015 6:18 pm

The Master Wheeler set of screw drivers and bits works exceptionally well.

Guest
Guest


Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by beeser Fri Jan 02, 2015 6:50 pm

ChipEck wrote:The Master Wheeler set of screw drivers and bits works exceptionally well.
Are they made in China?

beeser

Posts : 1119
Join date : 2014-06-19

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by Jerry Keefer Fri Jan 02, 2015 7:09 pm

beeser wrote:  I don't have any of Wheeler Engineering tools but it's my impression that the gunsmithing screwdriver sets are made in China.  And I've never seen a quality built tool made in China.
 Well, I am  not sure. Battenfeld Technology is the industry brand.. I can't find a country of origin anywhere on  my set or anywhere thru a brief internet search.. According to the website, the set carries a US Patent..
It's going to be tough to set up a full line shop and avoid all foreign products..
Jerry Keefer
Jerry Keefer

Posts : 1001
Join date : 2012-01-02
Location : Maidens, VA

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by dronning Fri Jan 02, 2015 7:18 pm

+1 on Snap-on or Felo (German and I like their ergo handles)
+1 on the Master Wheeler Set, I have it and like Jerry I have a ton of tools I've collected over the years.  With no machines I'm well into 5 figures on just hand tools.

The Master Wheeler set is a great value - it has a ton of bit sizes and having the right size bit for a screw is more important than having the best driver out there that is the wrong size.  Under $70 - it would cost me >$300 to cover those sizes in Felo's.

Oh and fewer and fewer of the Snap-on tools are made in the USA, many don't have the USA mark anymore.

They started to remove the COO (Country Of Origin) from their tools back in 2011.  

- Dave


Last edited by dronning on Fri Jan 02, 2015 7:30 pm; edited 1 time in total (Reason for editing : added info)
dronning
dronning

Posts : 2581
Join date : 2013-03-20
Age : 70
Location : Lakeville, MN

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by C.Perkins Fri Jan 02, 2015 7:40 pm

Having been an automotive repair technician for 30+ years can tell you that I have 6 figures invested in tools.
90% of it is Snap-On with some MAC and Matco.
In this day and age yes, Snap-On tools may not be made in the USA and their other line of tools called Blue Point are all imported but still descent equipment with the same warranty.

Having a screwdriver bit set and handle that has bits to perfectly fit the screws goes a long way.
No tapered type screwdrivers which most are.

A set of good punches and punch block are mandatory.

Clarence
C.Perkins
C.Perkins

Posts : 742
Join date : 2011-06-13
Age : 60
Location : Surrounded by pines in Wi.

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by beeser Fri Jan 02, 2015 9:09 pm

Specific to screwdrivers, what about the Grace and Brownell's Magna-Tip screwdrivers?  Both state that they're made in the USA.  After doing a little more research it seems that it would be difficult at best to come up with a set of Snap-on drivers specific for gun work.

beeser

Posts : 1119
Join date : 2014-06-19

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by Jack H Fri Jan 02, 2015 10:38 pm

The Magna set is fine.  I have that too.  After a while you will find the bits you use all the time.  Then you can use a old Rx pill bottle to put them in.
Jack H
Jack H

Posts : 2635
Join date : 2011-06-10
Age : 74
Location : Oregon

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by C.Perkins Sat Jan 03, 2015 1:22 pm

Just make sure whatever you get either individual screwdrivers or a bit set, that they are hollow ground.

Clarence
C.Perkins
C.Perkins

Posts : 742
Join date : 2011-06-13
Age : 60
Location : Surrounded by pines in Wi.

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by 1joel1 Tue Jan 06, 2015 10:41 am

^^^ Hollow ground. I got a nice set of USA made with wooden handles at Amazon:

http://www.amazon.com/gp/product/B0030HL5O0/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Joel

1joel1

Posts : 391
Join date : 2012-11-09
Location : San Diego, CA

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by jmdavis Tue Jan 06, 2015 11:03 am

The Wheeler set is good. But the specific tools depend on what you want to be able to do. 


1. whatever you need for cleaning (gun cradle, rods, chamber brushes, etc)
2. Screwdriver and bit set
3. good holding device such as vise (this could be switched with 4 and 5)
4. steel and brass punches
5. brass and fiber hammer
6. caliper and micrometer (inside, outside and depth guage)
7. files (machine files, swiss files, needle files etc)
8. strap wrenches

As a kid I watched my grandfather (who was no gunsmith but skilled at hand work and math) make various parts from scrap metal for rifles using files, a divider, and a vise (or old mainspring vise attached to a board that he could hold with his knees).
jmdavis
jmdavis

Posts : 1409
Join date : 2012-03-24
Location : Virginia

Back to top Go down

Tools for gun work? Empty Re: Tools for gun work?

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum