Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Tricks for Bomar Rear Sight Disassembly

5 posters

Go down

Tricks for Bomar Rear Sight Disassembly Empty Tricks for Bomar Rear Sight Disassembly

Post by DeweyHales Wed Sep 24, 2014 10:04 pm

Does anyone here have a trick for disassembling a Bomar rear sight assembly? I want to make a new rear blade.
DeweyHales
DeweyHales

Posts : 640
Join date : 2011-06-10
Location : North Carolina

Back to top Go down

Tricks for Bomar Rear Sight Disassembly Empty Re: Tricks for Bomar Rear Sight Disassembly

Post by james r chapman Thu Sep 25, 2014 10:52 am

It works the same as a S&w rear sight. The castle nut on the left is usually staked onto the adjuster thread. You turn it to stop and continue till it breaks. You remove the pieces, and the spring. A new nut and thread are installed and staked. Check with Wigand to see if he has parts that will work.

Jim c

http://www.jackweigand.com/smith_wesson_rear_blade.html
james r chapman
james r chapman
Admin

Posts : 6059
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

Tricks for Bomar Rear Sight Disassembly Empty Re: Tricks for Bomar Rear Sight Disassembly

Post by AllAces Thu Sep 25, 2014 11:02 am

If the Bomar is the same as a S&W a special tool is needed to install the nut. Brownells sells one, but I made one using a small electronics flat blade screwdriver and a Dremel tool.
AllAces
AllAces

Posts : 745
Join date : 2011-08-30

Back to top Go down

Tricks for Bomar Rear Sight Disassembly Empty Re: Tricks for Bomar Rear Sight Disassembly

Post by james r chapman Thu Sep 25, 2014 11:35 am

Actually, I never had a problem screwing it on, a punch is used to bell the center of the thread swaging it in place YMMV.
james r chapman
james r chapman
Admin

Posts : 6059
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

Tricks for Bomar Rear Sight Disassembly Empty Re: Tricks for Bomar Rear Sight Disassembly

Post by STEVE SAMELAK Thu Sep 25, 2014 11:42 am

Instead of reworking the bomar have you considered the kensight option.
I THINK they make one with the Bomar cut & are well made,
STEVE SAMELAK
STEVE SAMELAK

Posts : 934
Join date : 2011-06-10

Back to top Go down

Tricks for Bomar Rear Sight Disassembly Empty Re: Tricks for Bomar Rear Sight Disassembly

Post by DeweyHales Thu Sep 25, 2014 4:59 pm

I got it apart. I cut a half moon from a lesser quality screwdriver. It holds the locking portion of the screw. The windage adjustment then unthreads. No pieces were damaged.
DeweyHales
DeweyHales

Posts : 640
Join date : 2011-06-10
Location : North Carolina

Back to top Go down

Tricks for Bomar Rear Sight Disassembly Empty Re: Tricks for Bomar Rear Sight Disassembly

Post by james r chapman Thu Sep 25, 2014 7:34 pm

Your lucky...  ;-)
james r chapman
james r chapman
Admin

Posts : 6059
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

Tricks for Bomar Rear Sight Disassembly Empty Re: Tricks for Bomar Rear Sight Disassembly

Post by Sa-tevp Sun Jul 12, 2015 3:43 pm

I bought a Kensight Deep Notch for another pistol of mine, but realized the base would not work on that slide. It also had a broken spring on the elevation screw. I decided to make lemonade out of lemons and removed the blade and put it on a different pistol. I made the tool out of an Apex bit using a Dremel whiz-wheel and had to clean up some of the parkerizing on the blade for fit and smooth movement, but it worked great on another Bo-Mar type sight. I used a automatic center punch to stake the screw and nut slots together afterwards.

Attached is a picture showing the tool and sight parts.
Attachments
Tricks for Bomar Rear Sight Disassembly Attachment
kensight.jpg You don't have permission to download attachments.(85 Kb) Downloaded 7 times
Sa-tevp
Sa-tevp

Posts : 925
Join date : 2013-07-20
Location : Georgia

Back to top Go down

Tricks for Bomar Rear Sight Disassembly Empty Re: Tricks for Bomar Rear Sight Disassembly

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum