WTB Smith Wesson 52-2 Springs

View previous topic View next topic Go down

WTB Smith Wesson 52-2 Springs

Post by Jwhelan939 on 9/14/2015, 8:22 pm

Looking for a Mainspring and a Drawbar plunger spring. Anyone have a drop on these guys? Can't seem to find them online anywhere. Shoot me an email with what you have/want. Located SE Pennsylvania. Thanks in advanced.

Jack
Jwhelan939@aol.com

Jwhelan939

Posts : 264
Join date : 2013-04-27
Age : 34
Location : Pipersville, PA

Back to top Go down

Re: WTB Smith Wesson 52-2 Springs

Post by Mark Matthews on 9/15/2015, 1:31 am

Did you try Wolfe springs?
avatar
Mark Matthews

Posts : 4
Join date : 2015-09-13
Age : 46
Location : Delta Junction, AK

Back to top Go down

Re: WTB Smith Wesson 52-2 Springs

Post by Virgil Kane on 9/15/2015, 7:08 am

Lots of parts from the M-39 fit the M-52. For the couple of bucks it cost from Brownell's for the M-39 main spring and plunger bar spring I'd take the chance and get those.

I used a plunger bar and spring from a M-39 on my own 52 and it worked fine. I'm sure the main spring would work too. With parts being unavailable for the M-52 we have to get creative if we want to keep shooting these pistols.


Virgil

Virgil Kane

Posts : 420
Join date : 2011-06-10

Back to top Go down

Re: WTB Smith Wesson 52-2 Springs

Post by Jwhelan939 on 9/15/2015, 8:17 am

I emailed Wolf. They said they do not make any springs, other than the recoil spring, for the 52. They did say that I could take 4 different measurements and they would see if they have anything close. I'll check out the 39 parts and see how that works.

Jwhelan939

Posts : 264
Join date : 2013-04-27
Age : 34
Location : Pipersville, PA

Back to top Go down

Re: WTB Smith Wesson 52-2 Springs

Post by C.Perkins on 9/15/2015, 4:24 pm

Jwhelan;

I will look through my parts bin tonight and see what I have for M39 springs.
I had an M39 that was flawless but as I do with all used guns will respring it whether it needs it or not.
I may have the whole Wolff M39 spring kit, but they will b used springs if you are interested.
Let me know while I look.

Clarence
avatar
C.Perkins

Posts : 675
Join date : 2011-06-13
Age : 53
Location : Surrounded by pines in Wi.

Back to top Go down

Re: WTB Smith Wesson 52-2 Springs

Post by Jwhelan939 on 9/15/2015, 4:38 pm

Even though they are used, I would at least be able to check them against the ones that are in the gun. Would be a good way to tell of the 39 parts fit the 52 or not. What would you want for them?

Jwhelan939

Posts : 264
Join date : 2013-04-27
Age : 34
Location : Pipersville, PA

Back to top Go down

Re: WTB Smith Wesson 52-2 Springs

Post by C.Perkins on 9/15/2015, 5:40 pm

Jwhelan;

All I could find was the hammer spring for the M39.
It appears to be the same size a the M52 but wound tighter at the two ends.
Shoot me a message with your address and I will drop it in the mail to you.

cperkins020@gmail.com

Clarence
avatar
C.Perkins

Posts : 675
Join date : 2011-06-13
Age : 53
Location : Surrounded by pines in Wi.

Back to top Go down

Re: WTB Smith Wesson 52-2 Springs

Post by LenV on 9/15/2015, 7:44 pm

Mainspring for 39/59

http://www.ebay.com/itm/S-W-SMITH-WESSON-MODEL-59-39-Mainspring-Plunger-Silver-or-Stainless-NA33-/291556515449?hash=item43e21f5e79
avatar
LenV

Posts : 2099
Join date : 2014-01-24
Age : 67
Location : Oargun

Back to top Go down

Re: WTB Smith Wesson 52-2 Springs

Post by Sponsored content


Sponsored content


Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum