Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

ITM-UNIVERSAL-BRASS-CATCHER-

+7
jbzeus
zanemoseley
SteveT
Skid
ChipEck
devildog
james r chapman
11 posters

Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty ITM-UNIVERSAL-BRASS-CATCHER-

Post by james r chapman 1/9/2016, 8:16 pm

Anyone have tried this brass catcher?

ITM brass catcher
james r chapman
james r chapman
Admin

Posts : 6059
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by devildog 1/9/2016, 9:56 pm

I got the square one, not the round one, in the mail yesterday, and took it to the range today.

ITM Brass Catcher

It works.  It is worth about what you pay for it, IMO.  Plastic PVC frame.  The "T" at the bottom folds down so it will stand by itself, or it will mount on a tripod.  Used it both ways today.  Don't know how long the thread will last.  It'll work for my purposes.
devildog
devildog

Posts : 30
Join date : 2015-02-18

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by james r chapman 1/9/2016, 9:58 pm

I'm going to T14TT and get the round one.
james r chapman
james r chapman
Admin

Posts : 6059
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by ChipEck 1/9/2016, 11:23 pm

I know it is pricey, but I purchased two cheaper brass catchers before I got this one.  Worth every penny.

http://www.cm-machine.com/Ultimate-Brass-Catchers-Accessories_c_25.html

Chip
ChipEck
ChipEck

Posts : 198
Join date : 2015-11-15
Location : Wisconsin

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by Skid 1/10/2016, 8:35 am

Jim the guy to my left used one of those types brass nets at Perry it worked for him .

Skid

Posts : 276
Join date : 2014-05-19
Age : 61
Location : Northern Lower Mi

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by SteveT 1/10/2016, 9:10 am

ChipEck wrote:I know it is pricey, but I purchased two cheaper brass catchers before I got this one.  Worth every penny.

http://www.cm-machine.com/Ultimate-Brass-Catchers-Accessories_c_25.html

Chip

+1 except I only bought 1 cheapo before getting a CMM.
SteveT
SteveT

Posts : 1056
Join date : 2011-06-10
Location : Illinois

https://sites.google.com/site/sdturner/shooting

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by zanemoseley 1/10/2016, 7:00 pm

Well I finally just ordered a CMM catcher, I got the 20" stem version, I think the 16" would have worked but I'd be using it at the higher extension more than not so I think the 20" Will be more stable. I can't wait, I've been doing the brass pick up game for a year now and will love just grabbing it out of a net.

zanemoseley

Posts : 2666
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by jbzeus 1/10/2016, 7:16 pm

Hey zanemosley, you don't even have to dig them out of the CMM.  There is a drawstring closure and you can just dump them out the bottom!  Smile

jbzeus

Posts : 25
Join date : 2015-04-02

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by Jack H 1/10/2016, 8:43 pm

jbzeus wrote:Hey zanemosley, you don't even have to dig them out of the CMM.  There is a drawstring closure and you can just dump them out the bottom!  Smile


On my CMM I use a chip clip on the bottom.
Jack H
Jack H

Posts : 2635
Join date : 2011-06-10
Age : 74
Location : Oregon

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by orpheoet 1/10/2016, 9:35 pm

I think the CMM is fantastic. with the bracket mounted to the back of my box I can carry everything to the line in one trip. I recommend the 20". I originally got the 16" but there's one outdoor match that has low benches and I had brass going everywhere. Plus I found the 16" very unstable when fully extended if windy.
orpheoet
orpheoet

Posts : 1050
Join date : 2014-07-29
Age : 56
Location : Berea, Oh

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by zanemoseley 1/13/2016, 5:03 pm

Got my 20" CMM catcher today and its better than expected. In the picture it looks a bit thin and possibly flimsy, it's far from flimsy. The base is very thick and sturdy. The rods are stiff and the height adjustment is very well executed. The net is equally nice and the drawstring emptying hole will definitely come in handy. There might be some jealous shooters on the line at my next match, I'm jealous of their ability at least they can be jealous of my brass catcher lol.

zanemoseley

Posts : 2666
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by Chris Miceli 1/13/2016, 5:18 pm

I love my CMM. buy once cry once,  they even sell parts separately.... i had to order a new base cause somehow i lost it.

Chris Miceli

Posts : 2715
Join date : 2015-10-27
Location : Northern Virginia

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by beeser 1/13/2016, 9:30 pm

Received a CMM catcher today and find the quality to be excellent.

beeser

Posts : 1119
Join date : 2014-06-19

Back to top Go down

  ITM-UNIVERSAL-BRASS-CATCHER- Empty Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum