ITM-UNIVERSAL-BRASS-CATCHER-

Go down

ITM-UNIVERSAL-BRASS-CATCHER-

Post by james r chapman on 1/9/2016, 8:16 pm

Anyone have tried this brass catcher?

ITM brass catcher
avatar
james r chapman
Admin

Posts : 2616
Join date : 2012-01-31
Age : 69
Location : HELL, Michigan

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by devildog on 1/9/2016, 9:56 pm

I got the square one, not the round one, in the mail yesterday, and took it to the range today.

ITM Brass Catcher

It works.  It is worth about what you pay for it, IMO.  Plastic PVC frame.  The "T" at the bottom folds down so it will stand by itself, or it will mount on a tripod.  Used it both ways today.  Don't know how long the thread will last.  It'll work for my purposes.
avatar
devildog

Posts : 21
Join date : 2015-02-18

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by james r chapman on 1/9/2016, 9:58 pm

I'm going to T14TT and get the round one.
avatar
james r chapman
Admin

Posts : 2616
Join date : 2012-01-31
Age : 69
Location : HELL, Michigan

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by ChipEck on 1/9/2016, 11:23 pm

I know it is pricey, but I purchased two cheaper brass catchers before I got this one.  Worth every penny.

http://www.cm-machine.com/Ultimate-Brass-Catchers-Accessories_c_25.html

Chip
avatar
ChipEck

Posts : 171
Join date : 2015-11-15
Location : Wisconsin

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by Skid on 1/10/2016, 8:35 am

Jim the guy to my left used one of those types brass nets at Perry it worked for him .

Skid

Posts : 173
Join date : 2014-05-19
Age : 55
Location : Northern Lower Mi

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by SteveT on 1/10/2016, 9:10 am

ChipEck wrote:I know it is pricey, but I purchased two cheaper brass catchers before I got this one.  Worth every penny.

http://www.cm-machine.com/Ultimate-Brass-Catchers-Accessories_c_25.html

Chip

+1 except I only bought 1 cheapo before getting a CMM.
avatar
SteveT

Posts : 287
Join date : 2011-06-10
Location : Illinois

https://sites.google.com/site/sdturner/shooting

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by zanemoseley on 1/10/2016, 7:00 pm

Well I finally just ordered a CMM catcher, I got the 20" stem version, I think the 16" would have worked but I'd be using it at the higher extension more than not so I think the 20" Will be more stable. I can't wait, I've been doing the brass pick up game for a year now and will love just grabbing it out of a net.

zanemoseley

Posts : 603
Join date : 2015-07-11

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by jbzeus on 1/10/2016, 7:16 pm

Hey zanemosley, you don't even have to dig them out of the CMM.  There is a drawstring closure and you can just dump them out the bottom!  Smile

jbzeus

Posts : 21
Join date : 2015-04-02

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by Jack H on 1/10/2016, 8:43 pm

jbzeus wrote:Hey zanemosley, you don't even have to dig them out of the CMM.  There is a drawstring closure and you can just dump them out the bottom!  Smile


On my CMM I use a chip clip on the bottom.
avatar
Jack H

Posts : 1492
Join date : 2011-06-10
Location : Oregon

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by orpheoet on 1/10/2016, 9:35 pm

I think the CMM is fantastic. with the bracket mounted to the back of my box I can carry everything to the line in one trip. I recommend the 20". I originally got the 16" but there's one outdoor match that has low benches and I had brass going everywhere. Plus I found the 16" very unstable when fully extended if windy.
avatar
orpheoet

Posts : 667
Join date : 2014-07-29
Age : 50
Location : Lakewood, Oh

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by zanemoseley on 1/13/2016, 5:03 pm

Got my 20" CMM catcher today and its better than expected. In the picture it looks a bit thin and possibly flimsy, it's far from flimsy. The base is very thick and sturdy. The rods are stiff and the height adjustment is very well executed. The net is equally nice and the drawstring emptying hole will definitely come in handy. There might be some jealous shooters on the line at my next match, I'm jealous of their ability at least they can be jealous of my brass catcher lol.

zanemoseley

Posts : 603
Join date : 2015-07-11

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by Chris Miceli on 1/13/2016, 5:18 pm

I love my CMM. buy once cry once,  they even sell parts separately.... i had to order a new base cause somehow i lost it.
avatar
Chris Miceli

Posts : 2259
Join date : 2015-10-27
Location : Northern Virginia

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by beeser on 1/13/2016, 9:30 pm

Received a CMM catcher today and find the quality to be excellent.

beeser

Posts : 956
Join date : 2014-06-19

Back to top Go down

Re: ITM-UNIVERSAL-BRASS-CATCHER-

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum