Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

To weld on slide or not ?

3 posters

Go down

To weld on slide or not ?  Empty To weld on slide or not ?

Post by JPete 2/27/2016, 10:44 pm

This old Remington Rand slide had a clark rail installed on it.  The holes were drilled off center. Was thinking of tig welding the holes up and relocating them. Is this a good idea? I'm worried about making the slide soft or warping it. Any advise?

To weld on slide or not ?  Reming11

JPete

Posts : 5
Join date : 2014-11-26

Back to top Go down

To weld on slide or not ?  Empty Re: To weld on slide or not ?

Post by sixftunda 2/28/2016, 4:54 am

A High Master in my area actually had his scope rings welded onto the slide.  It can be done.
sixftunda
sixftunda

Posts : 455
Join date : 2012-05-18
Age : 51
Location : North Central Ohio

Back to top Go down

To weld on slide or not ?  Empty Re: To weld on slide or not ?

Post by kc.crawford.7 2/28/2016, 5:06 am

Chances are your slide is already soft.  A good tig won't do any damage.  Just make sure you let your welder know you have to have it drilled and tapped again.
kc.crawford.7
kc.crawford.7

Posts : 711
Join date : 2012-12-09
Location : Maysville, NC

http://www.kcskustomcreations.com

Back to top Go down

To weld on slide or not ?  Empty Re: To weld on slide or not ?

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum