WTB Pardini HP .32 S&W Long

Go down

WTB Pardini HP .32 S&W Long

Post by beeser on 4/27/2016, 9:57 am

Looking to purchase a Pardini HP .32 S&W Long complete pistol preferably one that is only a few years old.

beeser

Posts : 956
Join date : 2014-06-19

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by ChipEck on 4/27/2016, 6:14 pm

Unless you have a ton of ammo already do not rule out the .32 ACP.  Outside of your "friends" trying to hand you .22 brass from the ground as your "lost" .32 ACP brass it is crazy accurate.  

Chip
avatar
ChipEck

Posts : 174
Join date : 2015-11-15
Location : Wisconsin

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by beeser on 4/28/2016, 10:01 pm

ChipEck wrote:Unless you have a ton of ammo already do not rule out the .32 ACP.  Outside of your "friends" trying to hand you .22 brass from the ground as your "lost" .32 ACP brass it is crazy accurate.  

Chip
Thanks Chip but I already have a .32 ACP conversion.  Looking for a complete .32 S&W Long setup to use with or without the conversion.  Yes, .32 brass is not easy to find on the ground.

beeser

Posts : 956
Join date : 2014-06-19

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by ChipEck on 4/29/2016, 5:57 pm

I did the same.  Ordered a lower to make 2 complete Pardini's.  You might have to knock out the retaining pin in the lower you buy for the bolt to fit.
avatar
ChipEck

Posts : 174
Join date : 2015-11-15
Location : Wisconsin

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by beeser on 4/29/2016, 6:34 pm

ChipEck wrote:I did the same.  Ordered a lower to make 2 complete Pardini's.  You might have to knock out the retaining pin in the lower you buy for the bolt to fit.
That's one of the reasons I wanted to buy a complete .32 S&W Long setup, especially one that is a little older and compatible with my .32 ACP conversion without doing what you mentioned.  Using a conversion with the .22 seemed like a good idea until playing tag with sight adjustments.

beeser

Posts : 956
Join date : 2014-06-19

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by ChipEck on 4/29/2016, 6:39 pm

beeser wrote:
ChipEck wrote:I did the same.  Ordered a lower to make 2 complete Pardini's.  You might have to knock out the retaining pin in the lower you buy for the bolt to fit.
That's one of the reasons I wanted to buy a complete .32 S&W Long setup, especially one that is a little older and compatible with my .32 ACP conversion without doing what you mentioned.  Using a conversion with the .22 seemed like a good idea until playing tag with sight adjustments.
Exactly!  I think Larry's Guns sells a scope mount that can be drilled into the barrel housing so you would have a scope on each barrel.  To me, having a seperate lower gave me emergency backup option and I can have each trigger set as light as I legally can.

Chip
avatar
ChipEck

Posts : 174
Join date : 2015-11-15
Location : Wisconsin

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by jbzeus on 4/29/2016, 9:23 pm

What does a lower cost?

jbzeus

Posts : 21
Join date : 2015-04-02

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by ChipEck on 4/29/2016, 10:58 pm

$1,600
avatar
ChipEck

Posts : 174
Join date : 2015-11-15
Location : Wisconsin

Back to top Go down

32

Post by smithfan4152 on 5/4/2016, 1:02 am

Here are some 32 Wad pistols on S&W forum, in case you wish to take a look,
I think one of them is what you may be looking for. 
Have three European .32 wadcutter target pistols for sale. 

Walther GSP in excellent conditon , Pardini MP in Excellent condition and Hammerli 280 in excellent condition . 

1000.00 each shipped for Walther and Pardini and 1400.00 shipped for Hammerli 280 .( OV TO YOUR FFL IS INCLUDED. )

ERNITE FEDEX SHIPPING FROM ME
Please PM for details.      http://smith-wessonforum.com/guns-sale-trade/474196-wts-walther-gsp-prdini-mp-hammerli-280-32-wadcutter.html


Last edited by smithfan4152 on 5/4/2016, 1:04 am; edited 1 time in total (Reason for editing : add info)

smithfan4152

Posts : 23
Join date : 2016-03-13

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by beeser on 5/14/2016, 7:46 am

smithfan4152 wrote:Here are some 32 Wad pistols on S&W forum, in case you wish to take a look,
I think one of them is what you may be looking for. 
Have three European .32 wadcutter target pistols for sale. 

Walther GSP in excellent conditon , Pardini MP in Excellent condition and Hammerli 280 in excellent condition . 

1000.00 each shipped for Walther and Pardini and 1400.00 shipped for Hammerli 280 .( OV TO YOUR FFL IS INCLUDED. )

ERNITE FEDEX SHIPPING FROM ME
Please PM for details.      http://smith-wessonforum.com/guns-sale-trade/474196-wts-walther-gsp-prdini-mp-hammerli-280-32-wadcutter.html
Thanks but I was looking for a newer Pardini that will accept my .32 ACP conversion.

beeser

Posts : 956
Join date : 2014-06-19

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by beeser on 5/30/2016, 10:58 am

bump

beeser

Posts : 956
Join date : 2014-06-19

Back to top Go down

Re: WTB Pardini HP .32 S&W Long

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum