Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Hornady LNL powder measure safety

3 posters

Go down

Hornady LNL powder measure safety Empty Hornady LNL powder measure safety

Post by rec4309 3/13/2012, 4:43 pm

Here are pics of the safety I installed on my LNL press. I had a few times where the measure hung up and missed a load. Simple & Cheap insurance.

Hornady LNL powder measure safety IMG_9581

Hornady LNL powder measure safety IMG_9580

rec4309

Posts : 13
Join date : 2011-06-12
Location : Grandville, MI

Back to top Go down

Hornady LNL powder measure safety Empty Re: Hornady LNL powder measure safety

Post by DavidR 3/14/2012, 8:44 am

i have the LNL and never had a issue, could it be because your using a rcbs powder measure, even though they look the same as the hornady there could be subtle differences causing the hang up.
DavidR
DavidR
Admin

Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia

Back to top Go down

Hornady LNL powder measure safety Empty Re: Hornady LNL powder measure safety

Post by rec4309 3/14/2012, 4:07 pm

No, actually the hornady has hung up more than the RCBS. I use both, that is why the thumbscrews to attach. I can use it with any of my measures(2 hornady-1 RCBS). I have only had a couple hangups, but 1 costs a lot of time pulling bullets.

rec4309

Posts : 13
Join date : 2011-06-12
Location : Grandville, MI

Back to top Go down

Hornady LNL powder measure safety Empty Re: Hornady LNL powder measure safety

Post by DavidR 3/14/2012, 5:06 pm

i would take it apart and check the drum and other components for rust or any corrosion, since its case activated it should not stick if everything is clean and polished.
DavidR
DavidR
Admin

Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia

Back to top Go down

Hornady LNL powder measure safety Empty Re: Hornady LNL powder measure safety

Post by JLK 3/15/2012, 4:40 am

I don't mean to "hijack" you thread but if I may ask.
Is it possible to adapt an RCBS powder measure to Dillon 550B?
Thanks!
JLK
JLK
JLK

Posts : 146
Join date : 2011-06-10
Age : 73
Location : NE Ohio

Back to top Go down

Hornady LNL powder measure safety Empty Re: Hornady LNL powder measure safety

Post by rec4309 3/15/2012, 6:35 am

I used the Hornady case activated drop on my RCBS measure. The extension drop tube is the same thread as RCBS. It uses the standard die thread and powder through expanding dies are available for most pistol calibers.

rec4309

Posts : 13
Join date : 2011-06-12
Location : Grandville, MI

Back to top Go down

Hornady LNL powder measure safety Empty Re: Hornady LNL powder measure safety

Post by JLK 3/15/2012, 6:43 am

Thx!
JLK
JLK

Posts : 146
Join date : 2011-06-10
Age : 73
Location : NE Ohio

Back to top Go down

Hornady LNL powder measure safety Empty Re: Hornady LNL powder measure safety

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum