Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Light loads 625 revolver

+2
rich.tullo
knightimac
6 posters

Go down

Light loads 625 revolver Empty Light loads 625 revolver

Post by knightimac Mon Jun 06, 2016 6:42 pm

YI'm fixin to make up some lighter loads for my 625.  Shot my auto loads least week 3.8 BE 200 gr swc. I feel I could do better on short line with maybe 3.2????  Your experiences and thoughts appreciated.
knightimac
knightimac

Posts : 215
Join date : 2014-03-17
Location : Auburn, Pa

Back to top Go down

Light loads 625 revolver Empty Re: Light loads 625 revolver

Post by rich.tullo Mon Jun 06, 2016 7:20 pm

My Dad used to shot a 25. His pet load was 3.4 and 3.2 for practice using a Magus Style 801 bullet and auto-rim brass. 

For the long line he used 3.5.

RT
rich.tullo
rich.tullo

Posts : 1909
Join date : 2015-03-28

Back to top Go down

Light loads 625 revolver Empty Re: Light loads 625 revolver

Post by Wobbley Mon Jun 06, 2016 9:52 pm

One thing to consider is that very light loads might stick a bullet in the barrel of a revolver even though it might clear in an auto even with a failure to cycle.
Wobbley
Wobbley
Admin

Posts : 4481
Join date : 2015-02-13

Back to top Go down

Light loads 625 revolver Empty Re: Light loads 625 revolver

Post by rich.tullo Mon Jun 06, 2016 10:12 pm

Over 2gn of bullseye it won't squib if it is roll crimped. It may fly out of the barrel at 150fps and bounce down range but it should work. 

That is one reason why we use ECI's that stick out of the barrel.
rich.tullo
rich.tullo

Posts : 1909
Join date : 2015-03-28

Back to top Go down

Light loads 625 revolver Empty Re: Light loads 625 revolver

Post by rvlvrlvr Tue Jun 07, 2016 5:13 pm

I like a stouter load for my Model 625 at 50 yards: 4.5gr W231 or AA#2 under a 200gr LSWC.

For 25 yards, I use 185gr LSWC bullets over the same 4.5gr W231 or AA#2, seated to the same OAL - makes for a lighter-recoiling load. I need to move the sights down four clicks for the short-line with the 185gr bullets + 4.5gr powder. If I use the 200gr bullets + 4.5gr powder at the short line, I'll need to move the sights down eight clicks.

Anything lighter than 185gr bullet/4.0gr powder will produce leading somethin' fierce, at least in my guns, though they are pretty light-feeling loads. Using a heavier bullet, such as the 200gr you are thinking of using, will probably mitigate this somewhat.
rvlvrlvr
rvlvrlvr

Posts : 193
Join date : 2011-06-10
Location : Northern Virginia

Back to top Go down

Light loads 625 revolver Empty Re: Light loads 625 revolver

Post by rich.tullo Thu Jun 09, 2016 3:39 pm

4,5 w321 should be a very pleasant load
rich.tullo
rich.tullo

Posts : 1909
Join date : 2015-03-28

Back to top Go down

Light loads 625 revolver Empty Re: Light loads 625 revolver

Post by LenV Thu Jun 09, 2016 3:48 pm

I use 3.8gr Bullseye with the 200gr bullet. It must be close to rvlvrlr load because I have to change 8 clicks from long to short like he does.

Len
LenV
LenV

Posts : 4663
Join date : 2014-01-25
Age : 74
Location : Oregon

Back to top Go down

Light loads 625 revolver Empty Re: Light loads 625 revolver

Post by Orpanaut Tue Jul 19, 2016 8:52 am

Another approach for short line loads for the S&W 625 is to lighten the bullet, not the powder charge.  The Acme 175 grain coated SWC works well for me with the same powder charge I use for 185 grain coated bullets for my 1911.

Orpanaut

Posts : 181
Join date : 2015-08-06

Back to top Go down

Light loads 625 revolver Empty Re: Light loads 625 revolver

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum