Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Reload equivalents

+2
jglenn21
Warhorse
6 posters

Go down

Reload equivalents  Empty Reload equivalents

Post by Warhorse 9/20/2016, 1:17 pm

Can someone supply me with recipes for reloads approximating Federal 185gr SWC match loads.

Warhorse

Posts : 85
Join date : 2016-04-06
Age : 69
Location : MI

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by jglenn21 9/20/2016, 2:25 pm

well if you are going to do a bit load experimentation then 4.2 - 4.5  of either BE or V310.

think you'll find 4.2 works very well with either
jglenn21
jglenn21

Posts : 2567
Join date : 2015-04-07
Age : 75
Location : monroe , ga

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by SteveT 9/20/2016, 2:35 pm

Here are some loads I've seen posted over the years to duplicate Federal 185gr JSWC Match ammo. I have no direct experience with any of them. I use 4.4gr VV N310 with 185 JSWC or JHP which I think is a little hotter than Federal Match from 10-12 years ago, but I've never chrono'd Federal.

Those that specify a velocity call out 790-800 fps.

Those that specify a bullet all call out the Remington 185gr JSWC.

4.4-4.6    Bullseye, OAL 1.155"
4.2-4.3    Clays
4.3-4.6    Solo 1000
4.6-4.7    Titegroup
4.25        VV N310, New Starline, OAL 1.165", crimp 0.469", WLP
3.9-4.1    VV N310
4.3          WST
SteveT
SteveT

Posts : 1056
Join date : 2011-06-10
Location : Illinois

https://sites.google.com/site/sdturner/shooting

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by robert84010 9/20/2016, 5:10 pm

the exact powder and starting load is given on the second page:

https://www.bullseyeforum.net/t4916-federal-goldmedal-match-45-acp-185-gr-fmj-swc-770

robert84010

Posts : 834
Join date : 2011-09-21

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by Warhorse 9/20/2016, 7:02 pm

Thanks everybody, that'll get me close enough I think. I want this load to help break in my new Les Baer wad gun.

Warhorse

Posts : 85
Join date : 2016-04-06
Age : 69
Location : MI

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by DavidR 9/21/2016, 11:04 am

I did a lot of research years ago, called and talked to federal and even made it to a old guy that had been with them for years and he told me I couldn't buy the powder because what was used in the match  was a special blend of powders. He wouldn't say of what either.
DavidR
DavidR
Admin

Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by SteveT 9/21/2016, 1:37 pm

You might need a little higher charge weight for breaking in a newly built gun. Les Baer's are particularly known to be tight.
SteveT
SteveT

Posts : 1056
Join date : 2011-06-10
Location : Illinois

https://sites.google.com/site/sdturner/shooting

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by dronning 9/21/2016, 2:20 pm

SteveT wrote:You might need a little higher charge weight for breaking in a newly built gun. Les Baer's are particularly known to be tight.

+1, I needed to shoot 230gr ammo in 2 of my 4 Les Baer's to get them to cycle.  With one of them I shot the recommended 500 break in rounds at one sitting, even though I took breaks to let things cool down (both me and the gun) I felt like hell the next day.

Why you need 500 rounds is beyond me, now I'd just use some bore paste on the slide and after several passes be done with it.

- Dave
dronning
dronning

Posts : 2581
Join date : 2013-03-20
Age : 70
Location : Lakeville, MN

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by robert84010 9/21/2016, 8:40 pm

DavidR wrote:I did a lot of research years ago, called and talked to federal and even made it to a old guy that had been with them for years and he told me I couldn't buy the powder because what was used in the match  was a special blend of powders. He wouldn't say of what either.
well since BEA works at ATK Alliant Powder I am going to go with what he says regarding Alliant powders.

robert84010

Posts : 834
Join date : 2011-09-21

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by Warhorse 9/26/2016, 7:54 pm

SteveT wrote:Here are some loads I've seen posted over the years to duplicate Federal 185gr JSWC Match ammo. I have no direct experience with any of them. I use 4.4gr VV N310 with 185 JSWC or JHP which I think is a little hotter than Federal Match from 10-12 years ago, but I've never chrono'd Federal.

Those that specify a velocity call out 790-800 fps.

Those that specify a bullet all call out the Remington 185gr JSWC.

4.4-4.6    Bullseye, OAL 1.155"
4.2-4.3    Clays
4.3-4.6    Solo 1000
4.6-4.7    Titegroup
4.25        VV N310, New Starline, OAL 1.165", crimp 0.469", WLP
3.9-4.1    VV N310
4.3          WST
Thanks Steve, I loaded 4.3gr, 4.6gr, and 4.9gr charges of Bullseye with a Zero 185 JHP on top, and OAL 1.160". My Les Baer wadcutter hiccupped one time in 20 with the 4.3gr load, and ran perfect with the 4.6gr, and 4.9 gr loads with the Zero 185gr JHP's. I believe the 4.6gr load was the most accurate, it is what I will use in my next match.

Warhorse

Posts : 85
Join date : 2016-04-06
Age : 69
Location : MI

Back to top Go down

Reload equivalents  Empty Re: Reload equivalents

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum