WTB Bomar Rib for HS Victor

View previous topic View next topic Go down

WTB Bomar Rib for HS Victor

Post by CR10X on 10/30/2016, 6:53 pm

Looking for Bomar Rib for 5.5 inch HS Victor?  Any leads appreciated.
CR

CR10X

Posts : 454
Join date : 2011-06-17
Location : NC

Back to top Go down

Re: WTB Bomar Rib for HS Victor

Post by cdrt on 10/30/2016, 7:12 pm

I had a Bo-Mar rib on my HS Victor which I replaced with a rib from HS a few years ago. I sold the rib on eBay.  What I wanted to say, was that Bo-Mar did not make a dedicated rib for the Victor.  Bob Chow used a Bo-Mar for a HS Citation (I think), which he modified, for my Victor. It was slightly longer in the front, so it extended past the muzzle by about a sixteenth of an inch.  He also had to remove some metal from the underside of the rib that contacted the slide.  I remember looking at the Bo-Mar website at the time and they did not list a rib for the Victor.  Of course, we are talking about the 1980's, so my memory could be a little off.  Smile
avatar
cdrt

Posts : 154
Join date : 2016-04-12
Location : Amarillo, Texas

Back to top Go down

View previous topic View next topic Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum