WTB - Steel Barrel Weight for Marvel#1 conv.

Go down

WTB - Steel Barrel Weight for Marvel#1 conv.

Post by ash on 12/11/2016, 8:27 pm

Please let me know if you have one, Thanks. ash.

ash

Posts : 23
Join date : 2015-06-14
Location : SF Bay Area

Back to top Go down

Re: WTB - Steel Barrel Weight for Marvel#1 conv.

Post by JKR on 12/12/2016, 1:45 pm

I used a 5/8" shaft clamp. A couple bucks at about any hardware store.

JKR

Posts : 345
Join date : 2015-01-13
Location : Northern Wisconsin

Back to top Go down

Re: WTB - Steel Barrel Weight for Marvel#1 conv.

Post by ash on 12/12/2016, 3:29 pm

Good idea! I'll try the shaft clamp.  Thanks. ash

ash

Posts : 23
Join date : 2015-06-14
Location : SF Bay Area

Back to top Go down

Re: WTB - Steel Barrel Weight for Marvel#1 conv.

Post by rich.tullo on 12/12/2016, 3:58 pm

JKR wrote:I used a 5/8" shaft clamp. A couple bucks at about any hardware store.
That is a good idea the Marvel has holes in it that get fouled after 50 rounds.
avatar
rich.tullo

Posts : 1063
Join date : 2015-03-28

Back to top Go down

Re: WTB - Steel Barrel Weight for Marvel#1 conv.

Post by BE Mike on 12/12/2016, 5:44 pm

I also use the shaft clamp. I did find out early that it was best to use blue LocTite to secure the set screw. I also found out that the clamp would take cold blue very well. It won't make it shoot better, but does look better.
avatar
BE Mike

Posts : 1568
Join date : 2011-07-29
Location : Indiana

Back to top Go down

Re: WTB - Steel Barrel Weight for Marvel#1 conv.

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum