Pardini 32 acp quick loader

Go down

Pardini 32 acp quick loader

Post by Jwhelan939 on Wed Aug 16, 2017 9:27 pm

Have any of you 3d printers figured out a design for a 32 acp quick loader for the Pardini mags? I have one for the 22 and it's fantastic. But that design is much simpler. Everytime I shoot the 32 I end up with 2 bleeding cuts on my trigger finger.

Jwhelan939

Posts : 387
Join date : 2013-04-27
Age : 35
Location : Pipersville, PA

Back to top Go down

Re: Pardini 32 acp quick loader

Post by pistol champ on Wed Aug 16, 2017 10:42 pm

Replace the 32 acp magazine springs with springs from a Pardini 22 magazine. This will make loading a lot easier.

pistol champ

Posts : 86
Join date : 2013-02-27

Back to top Go down

Re: Pardini 32 acp quick loader

Post by Chris Miceli on Wed Aug 16, 2017 11:00 pm

https://www.pardiniguns.com/store/product_info.php?products_id=61

32s&w and 32acp same mag as far as I know
avatar
Chris Miceli

Posts : 2262
Join date : 2015-10-27
Location : Northern Virginia

Back to top Go down

Re: Pardini 32 acp quick loader

Post by Jwhelan939 on Thu Aug 17, 2017 12:24 am

Pistol champ, thank you for the feedback. No negative effects from switching springs?

Chris, I saw the one on Pardini's page. Didn't know the mags were the same. 47$ shipped is a little crazy. But I guess I'll look into it if noone else responds.

Jwhelan939

Posts : 387
Join date : 2013-04-27
Age : 35
Location : Pipersville, PA

Back to top Go down

Re: Pardini 32 acp quick loader

Post by gregbenner on Thu Aug 17, 2017 12:25 am

I use the speed loader on my 32 long and it works fine, just fyi.  No idea if it works on the ACP though.

gregbenner

Posts : 355
Join date : 2016-10-29
Location : San Diegp area

Back to top Go down

Re: Pardini 32 acp quick loader

Post by Chris Miceli on Thu Aug 17, 2017 5:49 am

Check here I believe he made some 

http://www.precisiontargetpistolgrips.com/custom-work.html
avatar
Chris Miceli

Posts : 2262
Join date : 2015-10-27
Location : Northern Virginia

Back to top Go down

Re: Pardini 32 acp quick loader

Post by PardiniAlex on Thu Aug 17, 2017 1:06 pm

We do in fact have a 32 mag loader that works for both 32 sw and 32 acp. It is a little steep in price but it works really well and saves loads of time between my strings of fire.

Alex C
Pardini USA

PardiniAlex

Posts : 6
Join date : 2017-08-17

Back to top Go down

Re: Pardini 32 acp quick loader

Post by carykiteboarder on Fri Aug 18, 2017 6:50 am

Without the mag loader, try this...
(I'm right handed...)
Holding mag in left hand, use right thumb to push .32acp round down and in JUST ENOUGH to catch the rim on the lips of the magazine. Then use the left thumb to push on the nose of the bullet to fully insert the round into the magazine.  Once you get the hang of this you'll be handling the next round in the right hand as you make the small push with your left thumb.
Glen
avatar
carykiteboarder

Posts : 146
Join date : 2014-10-29
Location : North Carolina

Back to top Go down

Re: Pardini 32 acp quick loader

Post by PardiniAlex on Fri Aug 18, 2017 12:30 pm

carykiteboarder wrote:Without the mag loader, try this...
(I'm right handed...)
Holding mag in left hand, use right thumb to push .32acp round down and in JUST ENOUGH to catch the rim on the lips of the magazine. Then use the left thumb to push on the nose of the bullet to fully insert the round into the magazine.  Once you get the hang of this you'll be handling the next round in the right hand as you make the small push with your left thumb.
Glen
I also do this if I forget my mag loader. 

For the most part all I do with my right thumb is push thebullet in place and I position it in the magazine with my left thumb, while never touching any of the metal really.

PardiniAlex

Posts : 6
Join date : 2017-08-17

Back to top Go down

Re: Pardini 32 acp quick loader

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum