Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

BE load for 185gr swaged hp

+2
dan allen
Jerry Goldfarb
6 posters

Go down

swaged - BE load for 185gr swaged hp Empty BE load for 185gr swaged hp

Post by Jerry Goldfarb 5/15/2012, 9:58 pm

I just ordered a test order of 500 45 ACP-185-SWCHP-SWAGED LEAD-N0 814 from Magnus. I was wondering what the best BE powder load would be for using at both 25yd and 50yd distances?
Jerry Goldfarb
Jerry Goldfarb

Posts : 81
Join date : 2011-06-10
Age : 85
Location : South Florida

Back to top Go down

swaged - BE load for 185gr swaged hp Empty Re: BE load for 185gr swaged hp

Post by dan allen 5/16/2012, 6:07 am

I would start with 4 grains of Bullseye. There are others powders that will likely work as well but I have no experience with them in a .45 load. Keep us posted.

dan allen

Posts : 116
Join date : 2011-06-19
Location : Distinguished - 2600 Club

Back to top Go down

swaged - BE load for 185gr swaged hp Empty Re: BE load for 185gr swaged hp

Post by Steve B 5/16/2012, 9:17 am

I've run anywhere from 3.9 - 4.2 gr. of bullseye with that exact bullet.

Steve B

Posts : 600
Join date : 2011-06-16
Location : Elkhart, IN

Back to top Go down

swaged - BE load for 185gr swaged hp Empty Re: BE load for 185gr swaged hp

Post by DavidR 5/16/2012, 10:19 am

On softer swaged 185 bullets, 3.9-4.0 is the sweet load, ive ransomed these many times and from a kart barrel it shoots less than 2'' in most guns, oal, 1.215 crimp to .469,
DavidR
DavidR
Admin

Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia

Back to top Go down

swaged - BE load for 185gr swaged hp Empty Re: BE load for 185gr swaged hp

Post by Founder 5/16/2012, 8:29 pm

I love the Zero 185 SWCHP and load 3.8 Clays for sustained fire 25 yards. Soft and accurate. I drop to 3.4 for indoor 50'
Founder
Founder
Moderator

Posts : 761
Join date : 2011-06-09
Age : 50
Location : Brooklyn, WI.

https://www.bullseyeforum.net

Back to top Go down

swaged - BE load for 185gr swaged hp Empty Re: BE load for 185gr swaged hp

Post by rob5r 5/17/2012, 1:33 pm

Joe Fobes wrote:I love the Zero 185 SWCHP and load 3.8 Clays for sustained fire 25 yards. Soft and accurate. I drop to 3.4 for indoor 50'

I use the same load. Clays or Clay Dot. Much cleaner than Bullseye.
rob5r
rob5r

Posts : 50
Join date : 2012-01-13
Location : Newport News, VA

Back to top Go down

swaged - BE load for 185gr swaged hp Empty Re: BE load for 185gr swaged hp

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum