Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

1911 Scope Rail

+25
Sa-tevp
Aprilian
JayhawkNavy02
frazitl2
inthebeech
DA/SA
MA Mike
jgolba
lablover
Multiracer
Jack H
LenV
Dcforman
ric1911a1
Willfish30
weber1b
zanemoseley
Plunker
mikemyers
Chris Miceli
SW-52
cdrt
dev6682
troystaten
Jon Eulette
29 posters

Page 1 of 4 1, 2, 3, 4  Next

Go down

1911 Scope Rail Empty 1911 Scope Rail

Post by Jon Eulette 1/20/2019, 3:59 pm

I am close to selling my version of a New Bomar screw pattern 1911 slide mounted rail. It has lightened cuts on the bottom of the rail to shed some weight. High Speed Low Drag! It will have black anodized finish. Photo is of my prototype. If you are interested in purchasing I will be taking pre-orders. $45 plus $7.20 shipping.1911 Scope Rail Jone_r10
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by troystaten 1/20/2019, 4:09 pm

Looks interesting.  Will have to look at my wadgun and see if it will fit. Either way hope you get lots of sales.

troystaten

Posts : 803
Join date : 2012-04-18

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by dev6682 1/20/2019, 6:18 pm

Would you be able to drill and tap a 1911 slide for this? If so, what's you price and turnaround time? Thanks!

dev6682

Posts : 41
Join date : 2018-01-07
Location : Oakton, Virginia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Jon Eulette 1/20/2019, 8:36 pm

PM sent
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by cdrt 1/20/2019, 9:19 pm

Jon,
How much do you think the final product will weigh?  I was thinking of using one of the Marvel's on my Clark .38 but it weighed too much with the dot.
cdrt
cdrt

Posts : 833
Join date : 2016-04-12
Location : Amarillo, Texas

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Jon Eulette 1/20/2019, 9:46 pm

I’ll post weight when I get the next version in my hands. Soon!
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by SW-52 1/21/2019, 6:28 am

Jon Eulette wrote:I am close to selling my version of a New Bomar screw pattern 1911 slide mounted rail. It has lightened cuts on the bottom of the rail to shed some weight. High Speed Low Drag! It will have black anodized finish. Photo is of my prototype. If you are interested in purchasing I will be taking pre-orders. $45 plus $7.20 shipping.1911 Scope Rail Jone_r10
Nice project Jon!!
SW-52
SW-52

Posts : 793
Join date : 2015-07-20
Age : 39

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Chris Miceli 1/21/2019, 7:04 am

good thing Marvel closed up shop! As this will be very nice.

Chris Miceli

Posts : 2715
Join date : 2015-10-27
Location : Northern Virginia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by mikemyers 1/21/2019, 7:43 am

Curious, are the slots deep and wide enough for the Kodiak mount?  Some other similar parts are not, requiring a trip to KC to fix.
mikemyers
mikemyers

Posts : 4235
Join date : 2016-07-26
Age : 80
Location : South Florida, and India

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Jon Eulette 1/21/2019, 10:39 am

Yes the Kodiak mount will work with the mount.
Also standard UD rings.
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Plunker 1/21/2019, 12:52 pm

Jon,

 Looks nice.  When you have a minute can take a couple more pictures ?  maybe a side view from the ejection side, end view from the muzzle end and one from the under side?

 Thanks

Plunker

Posts : 112
Join date : 2017-10-11
Location : N.C.

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Jon Eulette 1/21/2019, 4:43 pm

Rail weighs 1-5/8 oz. Lightest rail I'm aware of.
1911 Scope Rail Jone_r11
1911 Scope Rail Jone_r13
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by zanemoseley 1/21/2019, 5:00 pm

Jon, what do the old Marvel rails weigh?

zanemoseley

Posts : 2681
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Jon Eulette 1/21/2019, 5:09 pm

2.4 oz
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by zanemoseley 1/21/2019, 6:52 pm

Sounds like these may need to make their way onto the 38 & 45 you're building me Smile

zanemoseley

Posts : 2681
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by weber1b 1/21/2019, 10:29 pm

I have a Clark rail on my 45. Would the screw holes on this match the pattern of those? I would be interested in swapping to  different rail.

weber1b

Posts : 571
Join date : 2015-10-03
Location : Ballwin, MO

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Jon Eulette 1/21/2019, 10:30 pm

Yes it’s the same hole pattern.
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by weber1b 1/21/2019, 11:06 pm

Sooo.. pre-orders....When would you anticipate having the final product?

weber1b

Posts : 571
Join date : 2015-10-03
Location : Ballwin, MO

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Willfish30 1/22/2019, 5:06 pm

Hi Jon, will the hole pattern fit the Rock River Arms BULLSEYE WADCUTTER WITH RRA BULLSEYE RIB? The rib on it now is all steel and is very heavy with an UltraDot.

Willfish30

Posts : 34
Join date : 2019-01-22
Location : NYC

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Jon Eulette 1/22/2019, 5:36 pm

Yes they are the same pattern.
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by mikemyers 2/6/2019, 9:06 am

Jon, how soon will these be available?  Assuming these parts are "standard", so there's no machining, I'd like to buy one or two.  Are the notches all deep enough, and wide enough, for the Aimpoint Micro sights?

I am NOT a machinist.  I can work on things, but when it comes to drilling and tapping steel, I don't have the skill, training, or tools.   If you have one available now, and if these are standard patterns, so it will fit my guns, I'll mail you a check tonight.
mikemyers
mikemyers

Posts : 4235
Join date : 2016-07-26
Age : 80
Location : South Florida, and India

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Jon Eulette 2/6/2019, 10:51 am

Mike these should be a direct replacement for your current scope rails if the front screw is 1 inch from the front of the rail. So you do not have to do any machining, just remove the old one and put the new ones on. These will except the micro and Kodiak in point bases. They are being fabricated this week so I expect to have anodized amounts in the next 30 days. I will put you down for two of them.
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by mikemyers 2/6/2019, 12:57 pm

Do they have your name or logo. on them?
mikemyers
mikemyers

Posts : 4235
Join date : 2016-07-26
Age : 80
Location : South Florida, and India

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Jon Eulette 2/6/2019, 1:48 pm

Yes it says Eulette Precision on top of the rail. You can see it in the photo above.
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by ric1911a1 2/6/2019, 2:12 pm

Jon,

I would like a non-anodized one, if possible................

Ric
ric1911a1
ric1911a1

Posts : 338
Join date : 2013-05-07
Location : Upstate NY (the good part)

Back to top Go down

1911 Scope Rail Empty Re: 1911 Scope Rail

Post by Sponsored content


Sponsored content


Back to top Go down

Page 1 of 4 1, 2, 3, 4  Next

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum