1911 .22 conversions
3 posters
1911 .22 conversions
Last year I decided to buy a .22 conversion for my RI 1911 that is chambered in 9mm and found a good deal on an Advantage Arms conversion. Once I received the conversion I found out that it would not fit my 1911 unless I changed out the extractor to a .45 extractor or removed it all together. It wasn't a big deal but the whole point of buying the conversion was so I could easily switch back and forth at the range so I sold it. I am now looking at the Nelson conversions and wondering if they will fit the 9mm 1911 frame without modifications? I sent a couple emails to Nelson and never got a reply.
Ray Dash- Posts : 277
Join date : 2019-01-31
Location : NY
Re: 1911 .22 conversions
Probably not.
You needed to slightly modify the ejector on the R1
You needed to slightly modify the ejector on the R1
james r chapman- Admin
- Posts : 5578
Join date : 2012-01-31
Age : 73
Location : HELL, Michigan
Re: 1911 .22 conversions
I would recommend calling Nelson's rather than emailing. If they don't answer and you leave a message, they'll call you back.
rreid- Posts : 559
Join date : 2012-02-06

» 1911 .22 conversions
» 22 conversions for 9mm 1911
» EAA .22 conversions?
» .22 conversions. Which is best?
» Quality/Value Comparison of 1911 Conversions
» 22 conversions for 9mm 1911
» EAA .22 conversions?
» .22 conversions. Which is best?
» Quality/Value Comparison of 1911 Conversions
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|