Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Products part of PhotoEscape website is now active.

Page 4 of 4 Previous  1, 2, 3, 4

Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Products part of PhotoEscape website is now active.

Post by PhotoEscape 2/13/2019, 4:13 pm

First topic message reminder :

Hello everyone,
I finally have my own way of offering products to you and everyone else.  Products part of my website is ready for review and purchase of my Powder Transfer Units and other parts.  At this point most descriptions are the same as on my eBay listings, however I'm reviewing and changing them as deemed more appropriate for my own site.  I'd appreciate you taking a moment, perusing this site, and letting me know your thoughts.  Please feel free to critique as you feel necessary.  Here is the link - http://www.photoescapeinc.com/products/index.html

In near future I will be adding new products as well, - new funnels for 32 and 38 Special Wadcutters, and something else ...................  Question 
Thank you,
AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down


Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 3/27/2020, 3:53 pm

One more update!  You can find couple of the new products added on the website.

1. 9mm PTU for cast & coated projectiles sized to .357 & .358 with longer expander - http://www.photoescapeinc.com/products/9htc-ptu.html

2.  In order to address multiple requests and UD threads variations I machined Thread Conversion Rings that allow to convert "large to small" threads and backwards.  This was added to Aperture Rings Kit page - http://www.photoescapeinc.com/products/aperture-rings-kit.html

AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 5/17/2020, 5:13 pm

Posting this on several related treads.

I'm finally comfortable to sell Replacement Brass ends for Dillon XL750 and 550 primer tubes.  Product can be found here - 

http://www.photoescapeinc.com/products/replacement-brass-ends.html

I wasn't comfortable to run big batch of these ends, so price reflects availability.  I have about 50 of each size.

I have couple of new products in the pipeline, and will be posting as they are ready.  However it might be affected by matches coming up, - I can't wait to start shooting matches again!  2700 in Bristol, IN is hopefully next Saturday!  I'm sure everyone wants the same I do!  Let's get shooting starting again, yet PLEASE BE SAFE!  AND MAKE SURE OTHERS ARE SAFE AROUND YOU TOO!

AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 5/20/2020, 5:28 pm

Here is one more from pipeline.  I've been asked if it is possible to use Aperture rings on Jon Shue's shades.  Until very recent the answer was not,- Shue's shades do not have compatible ID threads, or for that matter threads at all.  I've contacted Jon offering to provide information so he can modify his shades.  That didn't go beyond him asking for my phone number, so he could call me.  I don't know if he ever called, - I'm getting a lot of calls from unknown to me numbers, and recently Verizon started qualifying them as a Spam.  Anyway, Kyle Barth, my hut-matte in Perry last year, provided with sample of red dot with Shue's shades.  What you see on the picture is a final product.  With Kyle's permission I'll be posting pictures of his dot with replacement shade attachments on my website.  Kyle is getting them for free, and he just ordered rings for it.  He also confirmed that Shue's attachment have same threads and interchangeable between pieces that are glued to the dot itself.  

I will be posting this product on the website shortly.  Replacement attachment are compatible with aperture and rubber band rings.

Be safe,
APProducts part of PhotoEscape website is now active. - Page 4 Img_4622
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by bpettet 5/21/2020, 3:27 pm

Some nice products.  I will be ordering a few pieces.

bpettet

Posts : 229
Join date : 2017-05-24
Location : Ft Worth, TX

http://www.stratos2.com

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 5/26/2020, 8:54 pm

Replacement extenders for Shue's shades have been posted. - http://www.photoescapeinc.com/products/replacement-extender-tubes.html

AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by bpettet 5/28/2020, 10:52 pm

Question...will the H1 shade kit also fit the H2?  Thanks.

bpettet

Posts : 229
Join date : 2017-05-24
Location : Ft Worth, TX

http://www.stratos2.com

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 5/29/2020, 3:09 am

bpettet wrote:Question...will the H1 shade kit also fit the H2?  Thanks.
Negative, or to be exact, one side might fit.  However another has smaller diameter.  This is TMBK as I don't own any of the H2s.

AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 6/23/2020, 8:35 am

New 45-HTC PTU will be introduced tomorrow by UniqueTek - http://www.uniquetek.com/product/T1740  I will post this product on my website after I return from Canton.

AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by bpettet 6/23/2020, 8:54 am

Interesting update.  That's a product I look forward to using in my Dillon press.  Love those bullets as I recently converted to using Brazos.

bpettet

Posts : 229
Join date : 2017-05-24
Location : Ft Worth, TX

http://www.stratos2.com

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 7/6/2020, 5:00 pm

Bristol IN, Cardinal / Marengo OH and Canton OH is over.  I'm back home, shipped all orders and finally page for 45-HTC PTU is created and active on the website.  I even included picture of the target for ammo loaded with this PTU, and tested using Ransom Rest.

AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 7/14/2020, 5:27 pm

Please be advised that my website has been switched to https for enhanced security.  Please update links you might have bookmarked.  Proper entry point to the website is now
https://www.photoescapeinc.com/

Thank you,
AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 11/5/2020, 7:22 pm

With outdoor season over I'm finally catching up.  Very soon I'll be posting new products on my website.  Here is the preview for the H2 shades.  Eric Binnion provided me with H2 red dot specimen, so I could take measurements and design rear shade.  Front shade is the same as my H1, and is press-on then secured firstly with locktite (or similar compound) and secondary with three little screws (if necessary, i.e. when used on 45).  Rear shade is a screw in using ID thread of the dot.  Both sides have small 30mm thread which allows for installation of Rubber Band and Aperture rings.  As well both sides can be extended using Ultradot's extension tubes.

Speaking of Rings - another review was posted on website.  This one is by another shooter who I admire.  I have no hope to shoot as good as he does.  However his example gives me hope, that I have few more shooting years ahead of me - https://www.photoescapeinc.com/products/aperture-rings-kit.html


Eric gets first set and it is free as a token of appreciation for enabling me to design this product. 

Products part of PhotoEscape website is now active. - Page 4 Aimpoi11

AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 11/16/2020, 11:33 am

New products are posted on website (finally!)


https://www.photoescapeinc.com/products/aimpoint-micro-h2-shades-kit.html
 
https://www.photoescapeinc.com/products/replacement-failsafe-bracket-kit.html
 
https://www.photoescapeinc.com/products/extended-die-lock-nuts.html


AP
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

lablover likes this post

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by PhotoEscape 1/11/2021, 8:29 pm

As it became an SOP for myself to provide members of this forum with head-up about upcoming additions to website listings, here is a picture of a new PTU for Hornady's LNL / AP platform.  Similarly to 45-HTC PTU for Dillon presses, it is designed to address loading 45 ACP Lead / Coated bullets, and it is sized based on #68 200 and Brazos 200 / 185 grains bullets.  Web page should be active by the end of this week. 

AP

Products part of PhotoEscape website is now active. - Page 4 Lnl-4510
PhotoEscape
PhotoEscape

Posts : 933
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Products part of PhotoEscape website is now active. - Page 4 Empty Re: Products part of PhotoEscape website is now active.

Post by Sponsored content


Sponsored content


Back to top Go down

Page 4 of 4 Previous  1, 2, 3, 4

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum