1911 Trigger Building Class

Go down

1911 Trigger Building Class Empty 1911 Trigger Building Class

Post by kc.crawford.7 on 8/26/2019, 2:59 pm

I have now got everything set up with a location for me to do the trigger build class.  Date is 5 October 2019, location is the Maysville Community Building located at 703 8th St, Maysville, NC 28555.  Cost for the class is $275.00 and is a one day class.  I will go over the interaction of parts and the proper way to build a new trigger is your 1911.  There are 11 seats left for this class.  Class size is a maximum of 15 students.  To reserve you spot in the class send an email to kc@kcskustom.com.


This is an intermediate to advanced class.  You must be fully capable of taking the bottom end of your 1911 apart and putting it back together without assistance.  A maximum of two pistols may be brought to the class to work on.  I will have trigger kits available, both roll and crisp for the class.  You do not have to purchase a kit from me.  But the parts you bring must be of good quality.


I look forward to hearing from you.


KC
kc.crawford.7
kc.crawford.7

Posts : 508
Join date : 2012-12-09
Location : Maysville, NC

http://www.kcskustomcreations.com

Back to top Go down

1911 Trigger Building Class Empty Re: 1911 Trigger Building Class

Post by dapduh2 on 8/26/2019, 3:22 pm

Sounds like a great way to spend a Saturday!

Is it going to be focusing on the TR sear?

Jigs, stones, etc going to be provided?
dapduh2
dapduh2

Posts : 92
Join date : 2018-03-24
Location : York, SC

Back to top Go down

1911 Trigger Building Class Empty Re: 1911 Trigger Building Class

Post by kc.crawford.7 on 8/26/2019, 3:49 pm

I will have a few things to assist.  Not focused on the TR sear, but definitely will be discussed.  I have a recommended tool list for those that plan on attending.
kc.crawford.7
kc.crawford.7

Posts : 508
Join date : 2012-12-09
Location : Maysville, NC

http://www.kcskustomcreations.com

Back to top Go down

1911 Trigger Building Class Empty Re: 1911 Trigger Building Class

Post by dapduh2 on 8/26/2019, 3:53 pm

I have a lot of my own things already too. But upon running the idea by my wife I was reminded of the baby that I have due earlier that week. Hope this class goes great enough for you to consider doing another in the future.
dapduh2
dapduh2

Posts : 92
Join date : 2018-03-24
Location : York, SC

Back to top Go down

1911 Trigger Building Class Empty Re: 1911 Trigger Building Class

Post by kc.crawford.7 on 8/28/2019, 7:12 am

There are now 10 seats left.
kc.crawford.7
kc.crawford.7

Posts : 508
Join date : 2012-12-09
Location : Maysville, NC

http://www.kcskustomcreations.com

Back to top Go down

1911 Trigger Building Class Empty Re: 1911 Trigger Building Class

Post by lablover on 8/28/2019, 8:28 am

Wish it wasn’t so darn far!  I’d be in that class in a heartbeat
lablover
lablover

Posts : 931
Join date : 2015-07-30
Location : Michigan

Back to top Go down

1911 Trigger Building Class Empty Re: 1911 Trigger Building Class

Post by chopper on 8/28/2019, 9:20 am

lablover wrote:Wish it wasn’t so darn far!  I’d be in that class in a heartbeat
  I do too. 
  It seems if you get to the northern plains areas and bullseye kind a dwindles down in shooters. Not much for seminars or classes, although Bob Marvel used to give a class on building a 1911. 
  Stan

chopper

Posts : 304
Join date : 2013-10-29
Age : 67
Location : Western Iowa

Back to top Go down

1911 Trigger Building Class Empty Re: 1911 Trigger Building Class

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum