WTB - PARDINI SP GRIP SCREW PIVOT NUT

Go down

WTB - PARDINI SP GRIP SCREW PIVOT NUT Empty WTB - PARDINI SP GRIP SCREW PIVOT NUT

Post by DHMG1 on 9/6/2019, 4:23 pm

OEM part is fine. I wondered if some of the folks with machining experience may be able to duplicate these?

DHMG1

Posts : 76
Join date : 2011-10-28

Back to top Go down

WTB - PARDINI SP GRIP SCREW PIVOT NUT Empty Re: WTB - PARDINI SP GRIP SCREW PIVOT NUT

Post by lalka686 on 9/9/2019, 9:50 am

This part would be very easy to duplicate. If it's same as air pistol grip nut than it's about 12mm long 8mm thick round stock bar threaded sideways with 5mm tap. You could use unthreaded portion of black oxyde M8 or 5/16" screw, cut section and drill & tap thru the side center.
Let me take exact measurements for you when I get home tonight. 
Bernard
lalka686
lalka686

Posts : 17
Join date : 2014-12-17
Location : Lake Zurich IL.

Back to top Go down

WTB - PARDINI SP GRIP SCREW PIVOT NUT Empty Re: WTB - PARDINI SP GRIP SCREW PIVOT NUT

Post by lalka686 on 9/10/2019, 12:40 pm

For air pistol grip, there is two sizes, one main for grip inserted into pistol frame & one for palm rest inserted into grip screw hole.
I was close guessing the size so here are the measurements:
Main pivot nut: 8.5mm diameter, 22mm long with M5x0.8 threaded hole
Palm support nut: 8.5mm diameter, 16.5mm long with M4x0.7 threaded hole
Bernard
Attachments
WTB - PARDINI SP GRIP SCREW PIVOT NUT Attachment
Pardini pivot nuts 1.jpg You don't have permission to download attachments.(42 Kb) Downloaded 2 times
lalka686
lalka686

Posts : 17
Join date : 2014-12-17
Location : Lake Zurich IL.

Back to top Go down

WTB - PARDINI SP GRIP SCREW PIVOT NUT Empty Re: WTB - PARDINI SP GRIP SCREW PIVOT NUT

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum