NORMAL Slide Stop for Marvel 1911-22?
2 posters
Page 1 of 1
NORMAL Slide Stop for Marvel 1911-22?
Today while assembling my Marvel conversion I decided to use my thumb rest slide stop I use to train with my bigger caliber uppers. It fits fine and after adjusting the guide rod it cycles too. Can I use my slide stop in place of the Marvel one to more closely replicate the feel when shooting 22?
thanks and Happy Thanksgiving!
N
thanks and Happy Thanksgiving!
N
Re: NORMAL Slide Stop for Marvel 1911-22?
The Marvel slide stop pivots on the pin. The pin is locked in place by the tightening of the recoil spring guide rod. A standard slide stop does not pivot on a loose pin because it’s monolithic. You will not be able to lock the slide to the rear when the standard slide stop pin is locked in the down position. You may also get interference from the follower hitting the slide stop tab that normally engages the follower to lock the slide back after the last shot is fired.
Jon
Jon
Jon Eulette- Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia
Allgoodhits likes this post
Similar topics
» Marvel conversion slide stop versions
» 9mm slide stop for 1911
» Need 1911 slide stop pin colored
» 1911 issue -slide stop
» Slide Stop
» 9mm slide stop for 1911
» Need 1911 slide stop pin colored
» 1911 issue -slide stop
» Slide Stop
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|