Slight blemish Pardini Triggers

I'm sure all here know I make a trigger for the Pardini Pistol that is similar to the 1911 shoe. I have a few opps that I'll sell for less cost. For example I used the wrong drill for the 3mm tap that is for the set screw that holds the trigger on the post so I tapped it slightly bigger. Some #5-40 and one that is an #8-32. (actually that one I drilled the hole in the wrong place so with a bigger set screw I could move the location back to the correct location) Also a few when I started making them and didn't have tapered end mill that are a bit expensive since then i purchased all I need)
 If interested let me know and I tell you what I have with prices. Currently the trigger sells for $135 +$5 shipping.

Pic of one for reference.
Personally, I really like the feel over the flat Pardini Trigger 

Photo looks to be the style for 1911 grips. Blemish triggers look the same. Set screw is not 3mm like Pardini trigger as mention due to drill size error but it will come with Hex wrench to fit. Others are the same but opening in the back is not tapered as with those that were done with tapered end mill. Might be a good item for someone wanting to test the trigger, it can be returned for full purchase credit toward unblemished one but I see no reason why! Unless the wrench is desired to be the same.