TOZ problem
3 posters
Page 1 of 1
TOZ problem
New TOZ fired OK out of the box, without grips. Installed Andrew's 3D printed grips, and now the firing pin clicks, but does not hit the cartridge (no dent).
Removed grips, still clicks, no fire.
Any suggestions before disassembly?
Removed grips, still clicks, no fire.
Any suggestions before disassembly?
Re: TOZ problem
Take the grips off and examine the gun very carefully for a plastic chip where it shouldn't be. It has happened to me with wood grips.
Boxturtle- Posts : 232
Join date : 2017-09-15
Location : Virginia
Re: TOZ problem
Mine would act up if I didn't have enough torque on the accelerator screw. 1/8 of a turn or less would make the difference. But I don't know that changing grips could induce that malfunction.
Merick- Posts : 318
Join date : 2015-08-13
Location : Hutchinson Kansas
Re: TOZ problem
Boxturtle- you made my day! I blew out the innards and the pistol now fires! Thank you so much!Boxturtle wrote:Take the grips off and examine the gun very carefully for a plastic chip where it shouldn't be. It has happened to me with wood grips.


» 22 Conversion Problem
» Hi Standard 1949 HD Military Failure to return to battery
» Problem with red dot
» M41 functioning problem
» Problem finding red dot
» Hi Standard 1949 HD Military Failure to return to battery
» Problem with red dot
» M41 functioning problem
» Problem finding red dot
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|