Lets try this again shall we ?
+3
RoyDean
SteveT
Multiracer
7 posters
Page 1 of 1
Lets try this again shall we ?
Voodoos 1911 .22 conversion
https://www.vudoogunworks.com/shop/firearms/pistols/target-22lr-1911-pistol
https://www.vudoogunworks.com/shop/firearms/pistols/target-22lr-1911-pistol
Multiracer- Posts : 978
Join date : 2017-03-15
Location : North Ohio
Re: Lets try this again shall we ?
Slide mounted optics on a 22 conversion? I wish there were more pictures. $2500 is a little on the high side, but not completely unreasonable for a full pistol assuming all the parts are good and well fitted.
Re: Lets try this again shall we ?
Steve, I might be mistaken, but I suspect that the "upper" is just a rebranded Marvel or Nelson and, if so, the combo rail is fixed to the barrel and the optic is therefore not "slide mounted".
I guess that, IMHO, other than the catchy name that might appeal to the "run and gun" crowd, why bother with this when you can get very, very nice complete guns from FCW Marvel almost instantly and for lower cost, or, if you prefer a Nelson, they will also sell you a complete gun, but the wait period might be slightly longer.
In both cases, choice of ribs, test target barrel, etc., etc.
I guess that, IMHO, other than the catchy name that might appeal to the "run and gun" crowd, why bother with this when you can get very, very nice complete guns from FCW Marvel almost instantly and for lower cost, or, if you prefer a Nelson, they will also sell you a complete gun, but the wait period might be slightly longer.
In both cases, choice of ribs, test target barrel, etc., etc.
RoyDean- Posts : 941
Join date : 2021-03-31
Age : 68
Location : Oregon
8eightring likes this post
Re: Lets try this again shall we ?
I'm pretty darn sure it's just a Marvel...
Dave
Dave
Dcforman- Posts : 919
Join date : 2017-11-18
Age : 43
Location : Ohio
8eightring likes this post
Re: Lets try this again shall we ?
Adam has seen and fired the Vudoo, not impressed by it. Seems to work OK. He is working with a Nelson conversion plus I'm making a one piece barrel for it from Lilja tightbore blank. I'll try a Lilja .22 match chamber reamer. I don't think it's worth the price as a shooter, simply put it looks good! Adam has a 208s, frankin215 (215 worked on with 1911 grips) and a Pardini but prefers the Nelson. Being that the scope is mounted on the barrel the conversion can be put on any 1911 frame and be accurate. So I doubt the extra cost will add anything to accuracy. Plus if it is a simple Marvel added to 1911 frame there is little to gain over pulling a Marvel on any 1911 frame!
Froneck- Posts : 1729
Join date : 2014-04-05
Age : 77
8eightring likes this post
Re: Lets try this again shall we ?
Vudoo Gun Works is a local company here in SW Utah. I toured their shop a year or so ago when they first started building 1911's. The upper IS a rebranded Marvel. They do build their own lowers. Vudoo changed ownership recently.
TonyH- Posts : 792
Join date : 2018-08-06
Location : Utah's Dixie
Multiracer likes this post
Re: Lets try this again shall we ?
Or get a complete FCW gun and save $1000!
That's certainly some voodoo.
That's certainly some voodoo.
Dr.Bill- Posts : 43
Join date : 2023-02-25
Location : Scottsdale, AZ
chopper likes this post
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|