Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Lapau .32 heads

+5
fc60
rkittine
bruce martindale
troystaten
ermakevin
9 posters

Go down

Lapau .32 heads  Empty Lapau .32 heads

Post by ermakevin 10/20/2024, 9:16 pm

look at the lead flash inside bullet skirt 
Lapau .32 heads 
should not be there on these quality heads
25% of the 1000 head bag. look like this. all i can do is dig out the loose lead. 
this is the last of my Lapau heads. 
running out of available good quality .32 WC heads.  
 Lapau .32 heads  Flashl10Lapau .32 heads  Flashl10Lapau .32 heads  Flashl10
ermakevin
ermakevin

Posts : 306
Join date : 2014-02-04
Location : New York

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by troystaten 10/20/2024, 9:33 pm

One of my shooting buddies is an excellent shooter and uses BearCreek .32 HBWC in his Pardini and is happy with the results,

troystaten

Posts : 826
Join date : 2012-04-19

ermakevin likes this post

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by ermakevin 10/20/2024, 10:17 pm

thanks ill look them up.
ermakevin
ermakevin

Posts : 306
Join date : 2014-02-04
Location : New York

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by bruce martindale 10/20/2024, 10:28 pm

I am going to bet that it makes no difference but…. have a friend who shoots them well, but only at 50 feet. I haven’t heard tell of good 50 yard results. I haven’t tried them myself. Mary had Bear Creek 32 samples at Cherry Ridge.

bruce martindale

Posts : 1770
Join date : 2011-07-30
Location : Upstate NY

https://www.bullseyeforum.net/t20747-feeling-center-a-10-bullsey

ermakevin likes this post

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by rkittine 10/20/2024, 10:44 pm

I stock both Lapua and Bear Creek for two different .32s  that have different note diameters.
rkittine
rkittine

Posts : 353
Join date : 2020-06-06
Age : 76
Location : Sag Harbor & Manhattan , New York

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by fc60 10/20/2024, 11:52 pm

Greetings,

For those that load the Lapua bullets, 83 grain or 98 grain, please post your 50 yard ten shot test groups.

Quote the powder and amount used.

I have yet to find a load that will shoot them well at 50 yards.

Cheers,

Dave
fc60
fc60

Posts : 1461
Join date : 2011-06-11
Location : South Prairie, WA 98385

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by ermakevin 10/20/2024, 11:57 pm

bruce martindale wrote:I am going to bet that it makes no difference but…. have a friend who shoots them well, but only at 50 feet. I haven’t heard tell of good 50 yard results. I haven’t tried them myself. Mary had Bear Creek 32 samples at Cherry Ridge.
hello Bruce
i took some of those.
ill have to give them a shot.
ermakevin
ermakevin

Posts : 306
Join date : 2014-02-04
Location : New York

Back to top Go down

Lapau .32 heads  Empty 83 grain Lapua loads

Post by Brian.highstandard 10/24/2024, 1:03 pm

Hello This post is what i'm looking for to load the 83 grain Lapua in my 32 SWL Pardini HP32. 

I have loaded 1.6 N310, 83 gr Lapua and it functioned the pistol and was very accurate at 50'. 

I suspect Bullseye shoots quite well but the Alliant site does not mention the 83. I have loaded 1.7 Bullseye and a 98 Speer or Bear Creek and was an exceptional load. BUt I'm low on Bullseye Powder and I can't find any. I suspect WST, W231, W244 but nothing is listed for the 83 grain. My particular Pardini really likes the Lapua 83. 

So what do you guys have for loads with the 83 Lapua? I want to be north of 760 FPS as that functions my pistol. 

THoughts please!!
Brian Miller

Brian.highstandard

Posts : 53
Join date : 2018-05-20
Age : 75
Location : Saginaw, Michigan

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by ermakevin 10/28/2024, 1:57 am

sorry never loaded anything below 98 g. with the .32 S&WL
TG and 231 work for me with the 98 heads
ermakevin
ermakevin

Posts : 306
Join date : 2014-02-04
Location : New York

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by RoyDean 10/28/2024, 3:41 am

So, for all of you 32SWL reloaders who question the quality & consistency of their components and / or process. I have recently been shooting Sellier & Bellot factory 32SWL WC ammo. It is relatively good price (compared to Lapua) and, IMHO, very accurate (compared to Magtech).

I have recently discovered that with a good gun/barrel, it is 10/X ring, even at 50 yards. Definitely X ring at 25 yards. I don't shoot 50 feet with CF these days.

Can I suggest that you buy some S&B. Shoot it carefully and set a benchmark for your gun/range. Only then can you judge where your reloads/components compare.

IMHO + YMMV

RoyDean

Posts : 1000
Join date : 2021-03-31
Age : 68
Location : Oregon

fc60 and jmoore like this post

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by ermakevin 10/28/2024, 11:57 am

RoyDean wrote:So, for all of you 32SWL reloaders who question the quality & consistency of their components and / or process. I have recently been shooting Sellier & Bellot factory 32SWL WC ammo. It is relatively good price (compared to Lapua) and, IMHO, very accurate (compared to Magtech).

I have recently discovered that with a good gun/barrel, it is 10/X ring, even at 50 yards. Definitely X ring at 25 yards. I don't shoot 50 feet with CF these days.

Can I suggest that you buy some S&B. Shoot it carefully and set a benchmark for your gun/range. Only then can you judge where your reloads/components compare.

IMHO + YMMV
great points and yes i will give that a try to find the S&B's.
interesting story Champions choice has about 10 boxes of .32 Lapua at Perry this year. i think he sold one box by the end of that week. lol
thanks for the info.
ermakevin
ermakevin

Posts : 306
Join date : 2014-02-04
Location : New York

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by Scota4570 10/28/2024, 4:43 pm

https://i1.wp.com/prepperswill.com/wp-content/uploads/2017/11/Anatomy-of-a-cartridge.png

Scota4570

Posts : 72
Join date : 2019-10-22

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by davidbullseye 11/8/2024, 2:37 am

We have been using bear creek bullets 98 gr HBWC for outdoor short line and indoor 50 foot, using a very light charge of VV310.  They function well in both an ERMA .32, hammerli 280, and more recently Smith & Wesson 16-4.

For outdoor long line we use bumped .314 Speer Plinkers with a little more VV310.

David

davidbullseye

Posts : 120
Join date : 2017-08-23

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by bruce martindale 11/8/2024, 1:12 pm

Funny that the Walther representative recommended Lapua factory ammo when asked how to improve accuracy of reloads. The student asked but what about reloads and W said “ Again I tell you to use Factory ammo” . I have forgotten who told me that story but my own experience with older factory ammo was not good die to 314 grooves in W barrels

bruce martindale

Posts : 1770
Join date : 2011-07-30
Location : Upstate NY

https://www.bullseyeforum.net/t20747-feeling-center-a-10-bullsey

Back to top Go down

Lapau .32 heads  Empty Re: Lapau .32 heads

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum