Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Vendor recommendation

4 posters

Go down

Vendor recommendation Empty Vendor recommendation

Post by inthebeech 10/25/2024, 8:43 am

I’ve posted a while back about accuracy troubles with some commercially cast bullets and after sampling now a number of vendors’ offerings, I can fairly confidently say that it was not the design of the poorly performing bullet as much as it was the quality of the casting; and perhaps some responsibility going to the poor quality of the lube as well.

My search was for a light bullet with the same accuracy potential as my 358311.  I thought I’d just share some accuracy results with a particular bullet in which I now believe the quality of the cast, is responsible.  So five stars to Matt’s Bullets.  Not only does he cast many proven designs straight from some classic Lyman molds, but he can also provide custom sizing on many styles as well as offer unsized/unlubed if you wish.
My Ransom Rest skills are not the best and neither is this the BEST of multiple groups fired; it is actually typical.
[url=https://servimg.com/view/20114623/84][img]https://i.servimg.com/u/f10/20/11/46/23/matts_10.jpg[/img][/url]
inthebeech
inthebeech

Posts : 652
Join date : 2012-03-17
Age : 59
Location : Harleysville, Pennsylvania

Back to top Go down

Vendor recommendation Empty Re: Vendor recommendation

Post by shanneba 10/25/2024, 9:17 am

Here is the photo


Vendor recommendation Matts_10

shanneba

Posts : 341
Join date : 2021-10-16
Age : 68
Location : Indiana

fc60 and jmoore like this post

Back to top Go down

Vendor recommendation Empty Re: Vendor recommendation

Post by james r chapman 10/25/2024, 11:18 am

He has become a valuable source given the closing of so many casting companies
james r chapman
james r chapman
Admin

Posts : 6359
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

Vendor recommendation Empty Re: Vendor recommendation

Post by messenger 10/25/2024, 12:25 pm

shanneba wrote:Here is the photo


Vendor recommendation Matts_10

What was the diameter? .357?

Bill
messenger
messenger

Posts : 1030
Join date : 2011-06-18
Location : North Carolina

Back to top Go down

Vendor recommendation Empty Re: Vendor recommendation

Post by inthebeech 10/30/2024, 5:58 am

I have Matt size .358 for my .3585 cylinder throats (and .3575 groove dia.) Since he uses Lyman molds for many of his offerings and they famously drop high, I bet he could do .359 or even larger.
inthebeech
inthebeech

Posts : 652
Join date : 2012-03-17
Age : 59
Location : Harleysville, Pennsylvania

Back to top Go down

Vendor recommendation Empty Re: Vendor recommendation

Post by messenger 10/30/2024, 10:57 am

I ordered 500 at .358. I'll see what happens.

Bill
messenger
messenger

Posts : 1030
Join date : 2011-06-18
Location : North Carolina

Back to top Go down

Vendor recommendation Empty Re: Vendor recommendation

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum