MAGAZINE HOLDER FOR GUNBOX
+4
Jake1911
Chris Miceli
Multiracer
askernie
8 posters
Page 1 of 1
MAGAZINE HOLDER FOR GUNBOX
Well...good news guys. Thanks to JOHN DERVIS a shooter from this forum who contacted me and sent me an extra magazine holder for our gun boxes.
I contacted my best friend who happens to be a mechanical engineer, and sent him pictures and he said " That looks like a piece of cake".
Here is the link to the recent conversation.
https://www.bullseyeforum.net/t7253-wtb-magazine-holder-for-gun-box
THE MILLION DOLLAR QUESTION IS...How many should I ask him to make? Who want these and how many?
I will be posting this in the commercial area too to get an accurate count.
Looking forward to hearing from all of you...
ernie the eyeball
I contacted my best friend who happens to be a mechanical engineer, and sent him pictures and he said " That looks like a piece of cake".
Here is the link to the recent conversation.
https://www.bullseyeforum.net/t7253-wtb-magazine-holder-for-gun-box
THE MILLION DOLLAR QUESTION IS...How many should I ask him to make? Who want these and how many?
I will be posting this in the commercial area too to get an accurate count.
Looking forward to hearing from all of you...
ernie the eyeball
- Attachments
Last edited by askernie on Sat Apr 08, 2017 8:27 pm; edited 1 time in total
askernie- Posts : 21
Join date : 2017-03-19
Re: MAGAZINE HOLDER FOR GUNBOX
I am interested. One thing to keep in mind is the advent of these 22 conversions. The holder now needs to have room for four 45 sized magazines ?
Ron
Ron
Multiracer- Posts : 1005
Join date : 2017-03-15
Location : North Ohio
Re: MAGAZINE HOLDER FOR GUNBOX
Actually, John mentioned that to me. I am going to have my friend take that into consideration.
Thanks
ernie
Thanks
ernie
askernie- Posts : 21
Join date : 2017-03-19
Re: MAGAZINE HOLDER FOR GUNBOX
I'd take 2
Don't care if they are metal or plastic
Don't care if they are metal or plastic
Chris Miceli- Posts : 2715
Join date : 2015-10-27
Location : Northern Virginia
Re: MAGAZINE HOLDER FOR GUNBOX
I would like two also. Have a price in mind yet?
Jake1911- Posts : 168
Join date : 2016-03-13
Magazine holder for gunbox
I would like at least 2, possibly 4.
Allan Campbell- Posts : 30
Join date : 2011-07-14
Location : 24
Re: MAGAZINE HOLDER FOR GUNBOX
Did anything ever happen with these?
jmdavis- Posts : 1409
Join date : 2012-03-24
Location : Virginia
Re: MAGAZINE HOLDER FOR GUNBOX
Wouldn't something like this be easy to make out of that plastic stuff they use for holsters.
Jack H- Posts : 2708
Join date : 2011-06-10
Age : 75
Location : Oregon
Re: MAGAZINE HOLDER FOR GUNBOX
I'm going to find out.. I do have one of the old originals to go by.
Kydex is easy to work with as you just need a mold or form and then heat the piece with a heat gun or oven then place it over the mold and press it down with a rubber vice to form the image..Tons of how to on the web.
it can also be glued together with some rather special glue.
I'll take pictures when I get to it..hopefully this week but I am building new EIC pistol..
Kydex is easy to work with as you just need a mold or form and then heat the piece with a heat gun or oven then place it over the mold and press it down with a rubber vice to form the image..Tons of how to on the web.
it can also be glued together with some rather special glue.
I'll take pictures when I get to it..hopefully this week but I am building new EIC pistol..
jglenn21- Posts : 2621
Join date : 2015-04-07
Age : 76
Location : monroe , ga
MAGAZINE HOLDERS WERE FINISHED
First, let me apologize getting back to all the people on this forum that have been interested in the magazine holder reproduction.
I was going to sell them on this forum but because of my current work schedule, I just wouldn't have time.
I have provided the contact information for my friend the mechanical engineer to the following distributers:
championschoice.com
bullseyegear.com
precisionpistolbox.com
Please which ever company you like for availability and prices.
THANKS AGAIN TO JOHN DERVIS, A SHOOTER ON THIS FORUM FOR PROVIDING THE ORIGINAL MAGAZINE HOLDER.
If you have any additional questions regarding this magazine holder, please feel free to contact me at 813-598-2902
Thanks to all,
Ernie "The Eyeball" Fuentes
I was going to sell them on this forum but because of my current work schedule, I just wouldn't have time.
I have provided the contact information for my friend the mechanical engineer to the following distributers:
championschoice.com
bullseyegear.com
precisionpistolbox.com
Please which ever company you like for availability and prices.
THANKS AGAIN TO JOHN DERVIS, A SHOOTER ON THIS FORUM FOR PROVIDING THE ORIGINAL MAGAZINE HOLDER.
If you have any additional questions regarding this magazine holder, please feel free to contact me at 813-598-2902
Thanks to all,
Ernie "The Eyeball" Fuentes
askernie- Posts : 21
Join date : 2017-03-19
Similar topics
» Nelson magazine holder
» Rainproofing my Gunbox
» Gunbox plans
» Travel Gunbox - pelican case?
» Mag holder for MG4
» Rainproofing my Gunbox
» Gunbox plans
» Travel Gunbox - pelican case?
» Mag holder for MG4
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum