Zero 185 swchp

Hello everyone I am looking for some loads for the zero 185 swchp

check sticky above your post
https://www.bullseyeforum.net/t1209-pet-loads-of-top-shooters-loads-from-the-past

Also check out this post.  While it is asking about the Magnus swaged 185 gr, it is my understanding that while Magnus makes their own cast bullets, they are a reseller of the Zero 185 gr SWC-HP, which is a swaged bullet.

https://www.bullseyeforum.net/t822-be-load-for-185gr-swaged-hp?highlight=swaged

If you have Bullseye, I would start with 4.0 grains and adjust a tenth or two as needed. Swaged bullets tend to be softer than cast bullets so load data for a cast 185 gr LSWC might need a slight reduction.

3.9 - 4.1 of BE will work for the LL

I am using 5.8 grains of Sport Pistol.

4.3 WST

orpheoet wrote:4.3 WST

Do you run this load with a scope or a ball type gun ?

About like some have said, 3.7 and 4.0 grs Bullseye with slide mounted UD and 10 spring.
Phil

Multiracer wrote:

orpheoet wrote:4.3 WST

Do you run this load with a scope or a ball type gun ?

Scope. I use 4.3 WST for 160gr for the short line and 4.3 with 185 for long. Keeps things simple

[quote="orpheoet"]

Multiracer wrote:

orpheoet wrote:4.3 WST

Scope. I use 4.3 WST for 160gr for the short line and 4.3 with 185 for long. Keeps things simple

Amazing how complicated we can make things when simple will work so well..

No 231 loads?

3.8 WST for the short line.  10 lb. spring.  Works well in my wadgun.