Trouble getting bushing to turn on a barrel

I am having trouble turning my barrel bushing on my cz shadow 2 to clean the pistol. Any suggestions?

Yes, make sure the slide is back far enough that the bbl is loose on the bushing. Turn it to remove the spring cap, then turn back till the detent is visible, use your bbl to slide the bushing out .
But why are you removing the bushing???

bushing

Bushing is stuck . Can't move it.

I wanted to remove bushing so I can pull the pin out the side to clean the gun.

Probably turned it the wrong direction and the lug on the bushing is hitting recoil spring plug. Turn other direction.
Jon

If it's like other cz 75s the pin that retains the front sight also holds the bushing in.. when you replace the pin use a touch of locktite

Easier to pull the slide offf the frame and removing the recoil spring and barrel first

Great got it apart and cleaned it. It was a little tricky. Busting does not have to come off to disassemble CZ Shadow 2 accushadow. On my 1911 it does. Bushing turn opposite ways on both pistols.

No instructions manual???

Yep but like most guys I didn't read it. LOL