Ultradot sight adjustment from 25 to 50

I don’t have access to a 50y range - how many clicks should I adjust either the matchdot 1 or ultradot v1 when changing from 25 to 50 prior to the beginning of a match?

Depends on gun and load, but 6-8+/- 2 should be close.

8 clicks.. if I can remember.

.22 or .45?

james r chapman wrote:.22 or .45?

I’m using a matchdot 1 on a 45 and a ultradot v1 on a 22

No adjustment with the 22, maybe 1 or 2 at most.

Four clicks is my standard adjustment for 45 with UD 1MOA scopes.

It depends a lot on the ammo and your hold.
Not every gun and ammo combo shoots to the same point of impact.

Using factory match ammo Winchester 185gr JWC from my stash I can hold center at 50 and 25. With my reloads it can vary and I have a chart for each load. I do try to mimic the factory ammo for the long line since it is the most accurate. 
Shame Winchester didn't spend the money to keep making that bullet and ammo.

For 22 set your zero at the top of the X ring for 25 and you’ll find 50 yards will be centered at the bottom of the X.  This means that you’ll lose points only to error not sights.

45 with normal target/match loads the bullets will drop about 3 inches at 50 with a 25 yard zero.  So the come-up is 6MOA.