Home
Search
Register
Log inVHITA VUORI 320
2 posters
Page 1 of 1
VHITA VUORI 320
by minelabbob 2/4/2020, 4:14 pm
hi guys
looking for a 50 yd load with a 124 FP. and n320 for my 9mm/1911 @ 1.100 in the 1075 fps.- 1125 range
bob
looking for a 50 yd load with a 124 FP. and n320 for my 9mm/1911 @ 1.100 in the 1075 fps.- 1125 range
bob
minelabbob- Posts : 61
Join date : 2020-02-04
Re: VHITA VUORI 320
by JIMPGOV 2/4/2020, 7:49 pm
4.3 GR OF VV320 WILL MEET YOU VELOCITY
I PREFER 4.8GR VV330 FOR THE 124GR XTP.
IF YOUR LOOKING AT THE HORNADY 124GR FLAT POINT OR TRUNCATED CONE BULLET FOR 50YDS, I WOULD THINK AGAIN. THE XTP's ARE BEST AT 50YDS, 2ND ARE THE HAP. THE 124FMJ DOES NOT SHOOT WELL AT 50YDS AT ALL. JP
I PREFER 4.8GR VV330 FOR THE 124GR XTP.
IF YOUR LOOKING AT THE HORNADY 124GR FLAT POINT OR TRUNCATED CONE BULLET FOR 50YDS, I WOULD THINK AGAIN. THE XTP's ARE BEST AT 50YDS, 2ND ARE THE HAP. THE 124FMJ DOES NOT SHOOT WELL AT 50YDS AT ALL. JP
JIMPGOV- Posts : 645
Join date : 2011-09-27
Re: VHITA VUORI 320
by minelabbob 2/5/2020, 5:08 am
thanks JP! i'll have to try some 124 xtp on a 50 yd. test . been using
rmr 124 FP for a while from 25-50 yd. with ok accuracy. 2-3in groups
closer to 3in. @ 50yd. but that n-320 has been a bugger for me, trying
to find a good load. I did some test with w231 115 xtp and found a sweet
spot for my gun . i have 2lb n-320 so I want to use it up.
thx bob
rmr 124 FP for a while from 25-50 yd. with ok accuracy. 2-3in groups
closer to 3in. @ 50yd. but that n-320 has been a bugger for me, trying
to find a good load. I did some test with w231 115 xtp and found a sweet
spot for my gun . i have 2lb n-320 so I want to use it up.
thx bob
minelabbob- Posts : 61
Join date : 2020-02-04
Re: VHITA VUORI 320
by minelabbob 2/5/2020, 7:05 am
only problem now that I can see my OAL with hap 125 is 1.055
to chamber in my gun. so @ 4.3 n-320 bullet is on or real close
to being compress load going to load 1 and see what case and
primer look like
bob
to chamber in my gun. so @ 4.3 n-320 bullet is on or real close
to being compress load going to load 1 and see what case and
primer look like
bob
minelabbob- Posts : 61
Join date : 2020-02-04
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum|
|
|