SIZING DIE QUESTION
+2
Steve in MI
JIMPGOV
6 posters
Page 1 of 1
SIZING DIE QUESTION
DO SAECO SIZING DIES WORK IN A STAR LUBER SIZER?
THANKS JP
THANKS JP
JIMPGOV- Posts : 658
Join date : 2011-09-27
Re: SIZING DIE QUESTION
I was told that they will not work in the Star sizer.
Steve in MI- Posts : 40
Join date : 2020-02-18
Re: SIZING DIE QUESTION
AFAIK, Saeco (Redding) dies and punches don't work in anything else. But I think maybe Herters had a press that used dies like that?
Lyman and RCBS are interchangeable.
Lyman and RCBS are interchangeable.
WesG- Posts : 723
Join date : 2018-09-21
Location : Cedar Park, TX - N CA
Re: SIZING DIE QUESTION
Greetings,
In the old days, SAECO did make greaser dies for the Star.
I have one in 0.314".
Proudly stamped "SAECO" on the flange.
Cheers,
Dave
In the old days, SAECO did make greaser dies for the Star.
I have one in 0.314".
Proudly stamped "SAECO" on the flange.
Cheers,
Dave
fc60- Posts : 1460
Join date : 2011-06-11
Location : South Prairie, WA 98385
Re: SIZING DIE QUESTION
You can get any size Star bullet lube/sizing die you need. On the Cast Bolts forum, there are vendors that will hone smaller dies to whatever you need:
http://castboolits.gunloads.com/forumdisplay.php?160-Lathesmith-s-Custom-Dies
http://castboolits.gunloads.com/forumdisplay.php?160-Lathesmith-s-Custom-Dies
NuJudge- Posts : 263
Join date : 2011-09-22
Age : 67
Location : SE Michigan
Re: SIZING DIE QUESTION
He does an excellent job. I've had him make several "off" sized and standard sized Star sizer dies for me.NuJudge wrote:You can get any size Star bullet lube/sizing die you need. On the Cast Bolts forum, there are vendors that will hone smaller dies to whatever you need:
http://castboolits.gunloads.com/forumdisplay.php?160-Lathesmith-s-Custom-Dies
Al- Posts : 651
Join date : 2011-06-10
Age : 69
Location : Bismarck, ND
Re: SIZING DIE QUESTION
+1
And his prices are lower than Magma.
And his prices are lower than Magma.
Steve in MI- Posts : 40
Join date : 2020-02-18
Similar topics
» Bullet Sizing
» New brass sizing
» Choosing a sizing die
» 9mm case sizing
» Sizing in a separate stage?
» New brass sizing
» Choosing a sizing die
» 9mm case sizing
» Sizing in a separate stage?
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum