Strong Case replacement feet/bumpers

You know the little rubber bumpers on the bottom of your Strong Case gun box? 



I have lost one and I'm wondering if anybody knows an exact replacement - maybe the same brand Strong Case used on them?

I was in the same situation, bought a pack of these on amazon, I still had the screws so no changes there. If you've lost the screw you may need to head over to your local hardware store to size the missing one.
https://smile.amazon.com/Alamic-Rubber-Non-Slip-Furniture-Stainless/dp/B08B87SRRG/ref=pd_sbs_7?pd_rd_w=HTLya&pf_rd_p=651d64d1-3c73-45b6-ae09-e545600e3a22&pf_rd_r=QAJQVHM402PPTWH1BCWT&pd_rd_r=39bfb055-cb4a-48c7-a544-9dfed994dd46&pd_rd_wg=d96k5&pd_rd_i=B08B87SRRG&psc=1

Zippy wrote:I was in the same situation, bought a pack of these on amazon, I still had the screws so no changes there. If you've lost the screw you may need to head over to your local hardware store to size the missing one.
https://smile.amazon.com/Alamic-Rubber-Non-Slip-Furniture-Stainless/dp/B08B87SRRG/ref=pd_sbs_7?pd_rd_w=HTLya&pf_rd_p=651d64d1-3c73-45b6-ae09-e545600e3a22&pf_rd_r=QAJQVHM402PPTWH1BCWT&pd_rd_r=39bfb055-cb4a-48c7-a544-9dfed994dd46&pd_rd_wg=d96k5&pd_rd_i=B08B87SRRG&psc=1

Thanks, Zippy. I grabbed a package of those. One of mine broke off and is missing (screw still there) and another one is broken and won't last long.

I had to replaced mine also.  I think I got some off ebay

Mine was probably one of the last ones made. Website was up when I bought it at Perry, was down by the time I returned home. There were no bumpers at all on the gun box or in the box it was in.

I had one of the bumpers on my strong case disappear, ended up getting two from the hardware store, they were about 1/8 inch shorter so I put them on the hinge side of the case so the case would tip back slightly which helps keep the drawers from sliding out.  To bad they don't make these cases anymore they are very nice.

I finally got fed up with my case not having feet and vowed to correct this with something that works and won’t need replacement. I bought these parts from McMaster-Carr
Redrilled the holes for the back feet in their original location and repositioned the front holes so I could easily reach and secure the new feet to the locking nut.
This was a huge upgrade, and the box is now rock solid with the new feet. The 1/4 size screws and reinforced feet are excellent - this is about a $30 cost for the upgrade.
Threaded-Stud Bumper
SBR, 1/4"-20 Thread, 1-1/2" OD, 3/4" High, Durometer 70A
9541K22 1 pack of 10

Serrated Locknut
Zinc-Plated Steel, 1/4"-20 Thread Size
91762A140 1 pack of 50

thanks for the info, mine is rocking like Elvis

Not sure whether this is a good idea, but using three feet, maybe two at back and a single middle front, would create a tripod and overcome problem of uneven bench and/or box?