Need Hornady 147 Load Data
5 posters
Page 1 of 1
Need Hornady 147 Load Data
Looking for load recommendations for a new custom 1911 longslide 6" with a 1" Ultradot, figure I'll need a bit of speed to keep a new tight 6" running reliable.
I've got Starline brass, CCI primers, Hornady 147 JHP, powders to choose from are Power Pistol, WST and Bullseye.
I've got Starline brass, CCI primers, Hornady 147 JHP, powders to choose from are Power Pistol, WST and Bullseye.
zanemoseley- Posts : 2687
Join date : 2015-07-11
Location : Cookeville, TN
Re: Need Hornady 147 Load Data
What is the barrel twist? Typically, 147s don't shoot well out of the 1:32 5" barrels. If yours is 1:16, with the extra inch length, you very likely could find a good (subsonic) load.zanemoseley wrote:Looking for load recommendations for a new custom 1911 longslide 6" with a 1" Ultradot, figure I'll need a bit of speed to keep a new tight 6" running reliable.
I've got Starline brass, CCI primers, Hornady 147 JHP, powders to choose from are Power Pistol, WST and Bullseye.
tovaert- Posts : 443
Join date : 2018-11-28
Re: Need Hornady 147 Load Data
The best 147 Hornady xtp load I have ever shot was 4.4 grains Winchester super Field with a Federal small pistol primers and an overall length of 1.10. Very accurate and comfortable to shoot. Use just enough Crimp to straighten out the case. .378 to .379 inches. Hope this helps.
OHitt- Posts : 10
Join date : 2017-07-12
BE Mike likes this post
Re: Need Hornady 147 Load Data
It's a 1:10 twist. Got 4# of Power Pistol on order and got a photo out of a Hornady reload manual showing their 147 load data, I'll probably start around 4.5 grains which should be about 900fps. I'll also try some lead wad cutters.
zanemoseley- Posts : 2687
Join date : 2015-07-11
Location : Cookeville, TN
Re: Need Hornady 147 Load Data
This probably won't help you much since you didn't list it as a powder choice, but I have used WSF as recommended by JIMPGOV and thought it worked great and was soft. The charge weight is 4.0 grains. Average FPS was 940, through a Colt barrel.
I'll be interested to see how you come out with PP- I have some, just haven't loaded any yet.
Best,
Chase
I'll be interested to see how you come out with PP- I have some, just haven't loaded any yet.
Best,
Chase
Chase Turner- Posts : 385
Join date : 2019-11-15
Re: Need Hornady 147 Load Data
KC sent me this a few years back with a 38 Super. With 452AA gone I used WST... Not powerful but accurate.
Axehandle- Posts : 879
Join date : 2013-09-17
Location : Alabama
kc.crawford.7 likes this post
Similar topics
» Hornady 115gr XTP load data?
» Load Data for Hornady FMJ SWC 45137?
» Looking for Load Data, Hornady 9mm 147 Grain XTP and Tightgroup Powder
» Hornady Lock-N-Load AP vs Lee Load Master
» .32 S&W Long
» Load Data for Hornady FMJ SWC 45137?
» Looking for Load Data, Hornady 9mm 147 Grain XTP and Tightgroup Powder
» Hornady Lock-N-Load AP vs Lee Load Master
» .32 S&W Long
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|