Question: Ace Magazines
+6
jglenn21
jmdavis
rich.tullo
Jon Eulette
dronning
Caster3845
10 posters
Page 1 of 1
Question: Ace Magazines
Would anybody know if Colt Ace magazines are interchangeable for use in the Nelson conversion unit? Thanks in advance.
Caster3845- Posts : 141
Join date : 2015-02-21
Location : Lisbon, IA
Re: Question: Ace Magazines
Caster3845 wrote:Would anybody know if Colt Ace magazines are interchangeable for use in the Nelson conversion unit? Thanks in advance.
Not sure but the Nelson mags are completely trouble free, they even work in my Marvel. Only issue I've ever heard of was someone had installed an EGW high mag release in their lower and that caused problems.
- Dave
dronning- Posts : 2581
Join date : 2013-03-20
Age : 71
Location : Lakeville, MN
Re: Question: Ace Magazines
Yes they work
Jon
Jon
Jon Eulette- Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia
Re: Question: Ace Magazines
I'll give you $5 each and take them off your hands. LOL
rich.tullo- Posts : 2013
Join date : 2015-03-27
Re: Question: Ace Magazines
Thanks, Jon Rich, I don't know if they are worth that much.
Caster3845- Posts : 141
Join date : 2015-02-21
Location : Lisbon, IA
Re: Question: Ace Magazines
Check Ebay they are pricey......Caster3845 wrote:Thanks, Jon Rich, I don't know if they are worth that much.
rich.tullo- Posts : 2013
Join date : 2015-03-27
Re: Question: Ace Magazines
Based on my recent experiences the GSG and SIG marked GSG mags are better in the Marvel than the Colt Ace mags that I think were made by Metalform. There is less play (though still some in the GSG).
Mike
Mike
jmdavis- Posts : 1409
Join date : 2012-03-23
Location : Virginia
Re: Question: Ace Magazines
I like the Sig mags in my Nelson just for the weight... they work perfectly
jglenn21- Posts : 2621
Join date : 2015-04-07
Age : 76
Location : monroe , ga
Re: Question: Ace Magazines
+1 for the Sig. I have 3 of them I use in my Nelsons. Flawless.
ric1911a1- Posts : 338
Join date : 2013-05-07
Location : Upstate NY (the good part)
Re: Question: Ace Magazines
I run the gsg/sig for the weight. But try factory Nelson ones run good as well.
Chris Miceli- Posts : 2715
Join date : 2015-10-27
Location : Northern Virginia
Re: Question: Ace Magazines
How tight does everyones mags fit in the gun. In other words how much up and down and back and forth motion in them when inserted.
jmdavis- Posts : 1409
Join date : 2012-03-23
Location : Virginia
Re: Question: Ace Magazines
All the plastic mags in my experience vannot use high mag release and have up and down play; gsg as well.
On Ace type mags l tune/dress/stone/polish feed lips; altered. I use high mag release and have to bend bottom of magazine floor plate to allow it to catch. I have minimal play. I make sure feed lips are not contacting ejector. I tune so front of cartridge has perfect feeding into feedramp for less deformation. Plastic mags and gsg allow cartridge nose to flop during feeding/cycling.
Jon
On Ace type mags l tune/dress/stone/polish feed lips; altered. I use high mag release and have to bend bottom of magazine floor plate to allow it to catch. I have minimal play. I make sure feed lips are not contacting ejector. I tune so front of cartridge has perfect feeding into feedramp for less deformation. Plastic mags and gsg allow cartridge nose to flop during feeding/cycling.
Jon
Jon Eulette- Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia
Re: Question: Ace Magazines
Jon Eulette wrote:All the plastic mags in my experience vannot use high mag release and have up and down play; gsg as well.
On Ace type mags l tune/dress/stone/polish feed lips; altered. I use high mag release and have to bend bottom of magazine floor plate to allow it to catch. I have minimal play. I make sure feed lips are not contacting ejector. I tune so front of cartridge has perfect feeding into feedramp for less deformation. Plastic mags and gsg allow cartridge nose to flop during feeding/cycling.
Jon
Does the flop in the plastic magazines seem to have any difference in accuracy caused by a deformed bullet? Has anyone ransom rested or sandbagged the different magazines to see?
Tim:H11- Posts : 2133
Join date : 2015-11-04
Age : 36
Location : Midland, GA
Re: Question: Ace Magazines
Ace mags spendy if you can find any. Not sure how the triple K replicas are
Chris Miceli- Posts : 2715
Join date : 2015-10-27
Location : Northern Virginia
Re: Question: Ace Magazines
A related question: I have some GSG mags that were originally with a Marvel Steel lockback unit I had. The followers from MP have a steel insert cut into them for the ledge that catches the slide stop to lift on last shot. Is this metal insert unique for the MP lockback units? Or is it simply a better mousetrap for most any unit?
I have not really tried them yet in Nelson or Advantage Arms units as their mags work just fine.
I have not really tried them yet in Nelson or Advantage Arms units as their mags work just fine.
Jack H- Posts : 2705
Join date : 2011-06-10
Age : 75
Location : Oregon
Similar topics
» S&W 52 magazines cause jam
» GSG Magazines
» 52 Magazines
» Best .45 to .22 conversion?
» Best magazines for 185 SWC.
» GSG Magazines
» 52 Magazines
» Best .45 to .22 conversion?
» Best magazines for 185 SWC.
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum