Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

1911 Bushing slop

+2
james r chapman
James Hensler
6 posters

Go down

1911 Bushing slop Empty 1911 Bushing slop

Post by James Hensler 7/17/2019, 7:23 pm

My Remington R1 has several thousand rounds threw it and I think it’s time to tighten it back up. I have 13  thousandth difference between the barrel and the inside of the bushing. What is the bullseye spec?
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by james r chapman 7/17/2019, 7:31 pm

How do you keep it on paper??
I think .001 difference in dia of barrel and bushing
james r chapman
james r chapman
Admin

Posts : 6087
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by James Hensler 7/17/2019, 7:34 pm

Shoot 840’s with it lol!
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by Deerspy 7/18/2019, 10:54 am

are you measuring at end of barrel?
Richard

Deerspy

Posts : 246
Join date : 2013-01-30
Location : east Iowa

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by James Hensler 7/18/2019, 11:14 am

Yes at the tip and I have a good set of calipers
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by james r chapman 7/18/2019, 11:28 am

Calipers??!!!! 🙀
james r chapman
james r chapman
Admin

Posts : 6087
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by james r chapman 7/18/2019, 11:31 am

How does it feel sliding on the unmounted barrel?
james r chapman
james r chapman
Admin

Posts : 6087
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by James Hensler 7/19/2019, 6:00 pm

Ok so you guy made me dig out my mics and they to the .0001 measured the same as the set of calipers I used at Ford very expensive motors! Lol
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by James Hensler 7/19/2019, 6:00 pm

I dropped my .45 off to my Smith and he said Yep it’s time
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by james r chapman 7/19/2019, 7:52 pm

Well then, yes, you wore it out! 😂
james r chapman
james r chapman
Admin

Posts : 6087
Join date : 2012-01-31
Age : 75
Location : HELL, Michigan

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by SteveT 7/19/2019, 8:00 pm

Several thousand rounds (6,000-7,000?) isn't very much for a pistol. I hope you mean several 10's of thousands of  rounds. 0.013" wear in less than 10k rounds means something is wrong.
SteveT
SteveT

Posts : 1057
Join date : 2011-06-10
Location : Illinois

https://sites.google.com/site/sdturner/shooting

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by Gary Wells 7/19/2019, 8:02 pm

Just curious and not questioning your judgement or measurement skills but was .013 when the slide was locked up?

Gary Wells

Posts : 370
Join date : 2015-09-07

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by James Hensler 7/20/2019, 1:20 am

No sir my lugs are still sharp and lock up tight. I don’t have use my wrench anymore and can easily remove the Bushing. There was .013 difference from the OD of my barrel .0575 to the ID of the bushing of .588
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by Jon Eulette 7/20/2019, 3:44 am

SteveT wrote:Several thousand rounds (6,000-7,000?) isn't very much for a pistol. I hope you mean several 10's of thousands of  rounds. 0.013" wear in less than 10k rounds means something is wrong.
It was probably not the right size in the first place; loose. Very possible there was a burr on backside of the ID of the bushing and it wore off from shooting it. Bushings barely wear at all. I have 30 year old pistols with minimal wear. I recently bought a 1965 Colt Kit gun 45 and the bushing is nice and right! High mileage pistol! So you should see an improvement from fitting a new bushing.
Jon
Jon Eulette
Jon Eulette

Posts : 4399
Join date : 2013-04-15
Location : Southern Kalifornia

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by James Hensler 7/20/2019, 4:22 am

This R1 made me retire my Gold Cup! Hands down it’s the best 45 I have ever shot and from a Ranson it was 1 7/8 at 50 out of the box. I have been thinking how many rounds it has through it and to the best I can come up with is 43000 plus. I have seen a down tick in my scores   Lately. I went from low 860’s to a 820 at Perry. I would call a good shot and see a 7 then later on I would call a 8 and is a X so I know something was or is wrong. But now it’s being addressed and it will be just like new!!!!
James Hensler
James Hensler

Posts : 1245
Join date : 2018-01-15
Age : 55
Location : Southwest Florida

Back to top Go down

1911 Bushing slop Empty Re: 1911 Bushing slop

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum