Fix for the LnL Case Feeder

Tired of the log jams on your case feeder. I ordered two.

https://www.sassybrass.com/sassybrass/product/casecage/

Bill

I just got back from the shop cussing at my 9MMs jamming in the feeder and jumping off the slider today, I'm going to try this too!

Great tip. I've got a Dillon case feeder and it chokes on 32ACP brass - maybe this might solve that problem. Worth a punt. 

I also see that they sell a support system for a Dillon case feeder that might be just what I'm looking for to feed another press. Great!

I've sent them an email.

Thanks.

They’re not that hard to make.  I used 1/4 inch OD nylon tube reinforced with a piece of brass wire (aluminum should also work) that fits into the tube.  All clamped in place with a plastic tube clamp.  I pre-bent the wire to the same shape as the nylon after it came off the coil.  Trimmed the end so it would fit the full diameter of the tube on the back surface of the bowl.