Hammer spring m41

Go down

Hammer spring  m41 Empty Hammer spring m41

Post by 310yuma on 2/7/2019, 12:17 pm

Looking  for the   stock spring rate for a Smith  M 41

310yuma

Posts : 28
Join date : 2016-02-12

Back to top Go down

Hammer spring  m41 Empty Re: Hammer spring m41

Post by PhotoEscape on 2/7/2019, 1:41 pm

Factory standard is 7.5 lbs. for recoil spring.
Hammer Spring I believe is 14lbs.  - confirming now.

Not finding this information.  Cylinder & Slide calls is drawbar spring, I believe.  No weight data there.

AP


Last edited by PhotoEscape on 2/7/2019, 2:18 pm; edited 2 times in total
PhotoEscape
PhotoEscape

Posts : 637
Join date : 2018-05-15
Location : Northern Illinois, USA

Back to top Go down

Hammer spring  m41 Empty Re: Hammer spring m41

Post by spursnguns on 2/7/2019, 1:44 pm

Hello 310yuma,

Wolff Springs.

7.5 pounds is factory standard....my two 41s and my 46 all run on 6.5 pound springs for CCI and Eley.

Jim
spursnguns
spursnguns

Posts : 429
Join date : 2013-01-04
Age : 62
Location : Gilroy, California

Back to top Go down

Hammer spring  m41 Empty Re: Hammer spring m41

Post by cdrt on 2/7/2019, 1:59 pm

spursnguns wrote:Hello 310yuma,

Wolff Springs.
7.5 pounds is factory standard....my two 41s and my 46 all run on 6.5 pound springs for CCI and Eley.
Jim
He's asking about the hammer spring, not the recoil spring.

I checked the Wolff Spring site and they list hammer springs for S&W center fire pistols, but not rimfires like the 41.
https://www.gunsprings.com/SMITH%20&%20WESSON/NUMBERED%20SERIES/cID1/mID58/dID261#886
cdrt
cdrt

Posts : 651
Join date : 2016-04-12
Location : Amarillo, Texas

Back to top Go down

Hammer spring  m41 Empty Re: Hammer spring m41

Post by spursnguns on 2/7/2019, 3:33 pm

You are correct.

I've owned five or six M41/46s and have never changed a hammer spring yet.

Thanks.

Jim
spursnguns
spursnguns

Posts : 429
Join date : 2013-01-04
Age : 62
Location : Gilroy, California

Back to top Go down

Hammer spring  m41 Empty Re: Hammer spring m41

Post by 310yuma on 2/7/2019, 4:10 pm

Thanks for  the info,

310yuma

Posts : 28
Join date : 2016-02-12

Back to top Go down

Hammer spring  m41 Empty Re: Hammer spring m41

Post by Bubba Blaster on 2/7/2019, 7:10 pm

Brownells sells Hammer springs for the M41 ,just one weight ,not specified .

Bubba Blaster

Posts : 165
Join date : 2013-10-20

Back to top Go down

Hammer spring  m41 Empty Re: Hammer spring m41

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top


 
Permissions in this forum:
You cannot reply to topics in this forum