Hammerli 215 Recoil Spring
+9
hamdenman
NukeMMC
Jack H
fc60
Black_Talon
Pbmoser1954
DA/SA
jglenn21
gjoyce3
13 posters
Page 2 of 2
Page 2 of 2 • 1, 2
Hammerli 215 Recoil Spring
First topic message reminder :
I ordered fresh 208 springs from interarms for my 215 (two stage trigger). The springs I received do not work - they will not compress enough to allow the slide to be replaced. The amount I would have to trim off seems quite excessive, maybe a centimeter of the fully compressed length.
My expectation was that most everything was more or less swappable as betwixt the 208 and 215. Has anyone else run into this?
I ordered fresh 208 springs from interarms for my 215 (two stage trigger). The springs I received do not work - they will not compress enough to allow the slide to be replaced. The amount I would have to trim off seems quite excessive, maybe a centimeter of the fully compressed length.
My expectation was that most everything was more or less swappable as betwixt the 208 and 215. Has anyone else run into this?
gjoyce3- Posts : 17
Join date : 2020-01-02
Location : San Diego
Re: Hammerli 215 Recoil Spring
Greetings,
Contact Red Feather and ask if they have the 1.201.260 part number.
I ordered some P240 parts and they were very pleased I quoted the exact part number.
Most of Larry's parts they bought were in marked envelopes.
Cheers,
Dave
Just had a flash of memory.
The Billharz website also lists the Walther equivalent part number. Contact Earl's Walther or Champion Choice to see if they have or can order them for you.
Contact Red Feather and ask if they have the 1.201.260 part number.
I ordered some P240 parts and they were very pleased I quoted the exact part number.
Most of Larry's parts they bought were in marked envelopes.
Cheers,
Dave
Just had a flash of memory.
The Billharz website also lists the Walther equivalent part number. Contact Earl's Walther or Champion Choice to see if they have or can order them for you.
fc60- Posts : 1460
Join date : 2011-06-11
Location : South Prairie, WA 98385
Hammerli 208 Recoil Springs- Interarms
Please send me your address. We reworked our spring design after a Camp Perry meeting in 2023. I will send two new springs to you. - Alan Aronstein
alaronstein- Posts : 190
Join date : 2019-07-04
Page 2 of 2 • 1, 2
Similar topics
» Hammerli 208 recoil spring
» Hammerli 208 Recoil spring
» Replacing recoil spring on Hammerli X-Esse SF
» Hammer spring/recoil spring relationship
» IZH-35m recoil spring
» Hammerli 208 Recoil spring
» Replacing recoil spring on Hammerli X-Esse SF
» Hammer spring/recoil spring relationship
» IZH-35m recoil spring
Page 2 of 2
Permissions in this forum:
You cannot reply to topics in this forum