Frankford X-10
+2
Rodger Barthlow
Tallthinliar
6 posters
Page 1 of 1
Frankford X-10
Does anyone have experience with the X-10? I have a Dillon 750 and was considering upgrading. The x10 seems to give a lot for the money. Case and bullet feeder with light for $999 at midway
Tallthinliar- Posts : 59
Join date : 2023-02-14
Re: Frankford X-10
But does it have a life time warranty like Dillon? I have no experience with Frankford
Rodger Barthlow- Posts : 393
Join date : 2013-08-10
Re: Frankford X-10
It is a comparable machine to the Dillon 1050 and the 1050 only has a 1 year warranty.
Wobbley- Admin
- Posts : 4819
Join date : 2015-02-12
Re: Frankford X-10
UR (Ultimate Reloader) has a comparison of the X-10, Dillon and other progressive presses.
https://www.youtube.com/watch?v=3m-koP_WIcY
More X-10 info https://www.youtube.com/watch?v=BOoEcsmKEFo
https://www.youtube.com/watch?v=oFuMUVpsAK4
https://www.youtube.com/watch?v=3m-koP_WIcY
More X-10 info https://www.youtube.com/watch?v=BOoEcsmKEFo
https://www.youtube.com/watch?v=oFuMUVpsAK4
Froneck- Posts : 1768
Join date : 2014-04-05
Age : 77
RoyDean likes this post
Re: Frankford X-10
interesting, thanks for sharing.
the x-10 sure seems to offer a lot especially since they already include a nicely integrated case feed system.... and i also found that they offer a matching integrated bullet feeder as a reasonably priced accessory option.
i've got to research a bit more about it....i would still like to have the option to drop powder that i measure by hand, particularly as my disability no longer allows me to shoot very high volumes of cartridges in a single setting..... and shooting consistent tiny groups remains a priority for me.
I will likely strongly consider this option
the x-10 sure seems to offer a lot especially since they already include a nicely integrated case feed system.... and i also found that they offer a matching integrated bullet feeder as a reasonably priced accessory option.
i've got to research a bit more about it....i would still like to have the option to drop powder that i measure by hand, particularly as my disability no longer allows me to shoot very high volumes of cartridges in a single setting..... and shooting consistent tiny groups remains a priority for me.
I will likely strongly consider this option
brand-new- Posts : 179
Join date : 2022-01-12
RoyDean likes this post
Re: Frankford X-10
I’ve only loaded 1000 9mm and decapped another 5k on my x10 so far. Took a lot of time to learn proper set up, implemented fixes before using it (replaced 2 bearings, dram worx hopper/baffle, and larger o-ring to increase friction on powder drop). Powder is dead on. Last 4 100 round batches I chrono’d this weekend had sd’s between 8/11 and ES’s 20/30’s - 2 and 3” groups lightly supported at 25 yrd w my 92 ltt centurion. Need to tackle rifle next but 9mm is a breeze.
badrum90- Posts : 5
Join date : 2024-06-18
blindshooter, RoyDean and brand-new like this post
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum