X-Esse Hammerli Trigger

hello any body have experience adjusting the 2-stage trigger on the new X-esse? just purchased a X-Esse dated 2022. 

I'm having a devil of a time trying to reduce the roll and have the trigger release at 2lbs.

im a bit of a novice with two stage triggers  

thanks
Kevin G.

Hello Kevin 
I was able to get my xesse down to a 2lb trigger
The front screw is just for take up the most you can turn it clockwise is a half turn other wise it will not reconnect with sear the back screw I turned counter clockwise 3/4 turn to get to 2lbs 
Good luck

Hdfatb wrote:Hello Kevin 
I was able to get my xesse down to a 2lb trigger
The front screw is just for take up the most you can turn it clockwise is a half turn other wise it will not reconnect with sear the back screw I turned counter clockwise 3/4 turn to get to 2lbs 
Good luck

thanks will do
by any chance do you belong to Freeport R&R?

Yes my wife is Lillian

Hdfatb wrote:Yes my wife is Lillian

oh your part of the Ronetts cheering committee lol

Hdfatb wrote:Hello Kevin 
I was able to get my xesse down to a 2lb trigger
The front screw is just for take up the most you can turn it clockwise is a half turn other wise it will not reconnect with sear the back screw I turned counter clockwise 3/4 turn to get to 2lbs 
Good luck

Thanks. I followed your instructions and set mine to 2.5 lbs.

Great glad to hear that it worked
It’s not a High standard trigger to much take up for my taste but it’s a lighter well balanced gun the other problem is cleaning you have to remove the sight every time you want to take the slide off