Teslong Bore scope info

I purchased a Teslong pistol bore scope, Like it but I get 2 images. One seems to be the 90° provided by the mirror. I then get the bore image full screen and a round image in the center of the screen Is that correct or how to I adjust to get one image?

How many mirrors did you get with it? If you use a smaller one in a larger barrel, you'll definitely see both the angles.

Here's a link to a full kit: https://www.amazon.com/gp/product/B085XXZQK2/

I got 2 mirrors, I'm using the small one in a .22 barrel.

Without objection, this will be moved to equipment.

No objection, I thought I did post it to equipment.

Froneck wrote:I got 2 mirrors, I'm using the small one in a .22 barrel.

Well, with mine there is a little bit of the down-barrel bore showing, but not a lot.

I took a pic with the .22 mirror in my Benelli, see attached.

Mine looks the same, which one is from the mirror? My mirror view is in the small circle in about the center of the screen.

The round image is what the mirror is seeing. Look at this pic of the throat on this bbl. Does that help your perspective?

You can also unscrew the mirror attachment and get a direct view straight down the bbl. The mirror view is more useful though, as you're looking directly down onto the surface of the bbl.

Froneck wrote:Mine looks the same, which one is from the mirror? My mirror view is in the small circle in about the center of the screen.

Like BT says, the mirror is the oval shape in the center, where you can see the lands going across the area. The long straight lines are the view that isn't reflected. This part of the image is useful for spotting debris and "interesting" things, then fish the mirror around to get a good look at 90 degrees. It can be a bit disorienting sometimes, because of the reflection effect which reverses the apparent motion.

I especially like the split view for inspecting the crown and chamber ends. You can get a great perspective. And definitely try removing the mirror for the chamber, see what you think.

yes sometimes the dual view is good! But am I to understand that with the mirror on the only view is the dual view? Single image from mirror is not possible? Or is it possible to zoom the mirror or the other image? Very little are in the instruction manual.

It's a super-basic camera, it has no focus, no zoom, no flash, no resolution settings, etc. What you see is what you get (1280x720).

You call it "dual view" - but it's just one image! You're seeing what the camera sees, which is wider than the mirror. I guess you could wrap tape around the end, to block off the extra angles! But that would make it much harder to use.

OK thanks! I was just wondering if I could with the computer alter the image.