Source for .32 wad cutter projectiles

Hello, I want to start loading. 32 S&W for my Walther and I'm looking for projectile and supplier recommendations. Thanks.

http://www.pennbullets.com/32/32-caliber.html
or  [url=http://magnusbullets.com/images/bullet photos/image201.jpg]http://magnusbullets.com/images/bullet%20photos/image201.jpg[/url]
And my personal favorite  http://tbbullets.com/

Len

Good to know Sir, ty.

I will be casting some up for my 32 wadcutter. If there is enough demand I was looking at getting a type 6 FFL to make and sell them.

Question for the 32 wadcutter shooters......

What is the bore diameter in your pistol?

What sized diameter bullet would you like to have?

Greetings,

The Walther GSP-C pistols generally have groove diameters 0.313"-0.314".

Ten ring groups can be had using the 0.314" H&N 100 grain Match Greased HBWC loaded in Lapua cases with 1.7 grains of Bullseye powder.

It helps to have an expander plug of 0.315" the length of the bullet to expand the case for a nice interference fit. 0.315" is not a typo. It allows for the spring back.

H&N bullets are available from Canada...

Cibles Canada Targets
181 St-Henri
Gatineau ( Hull ), QC
J8X 4J6
Tel. 819-778-8857
Fax. 819-778-2647
Web www.targets.ca
EBAY http://stores.shop.ebay.ca/Olympic-marksman-equipment
Visa,  MasterCard, Paypal accepted
Business hours Monday to Friday 8:30 am to 4:00pm

If you chose to shoot cast bullets, look for them sized 0.314" and use Lapua cases and 1.6 grains of Winchester WST powder.

Keep the bore/throat area clean. It fouls up quickly and accuracy diminishes.

Cheers,

Dave

HN can be bought from roco, also larrys guns carries some accurate speer wad cutters. we found these to be vey accurate
http://www.larrysguns.com/Products/Speer-38-Spec-148gr-HBWC--Match__Speer-spc-38-spc-Spec-prd--spc-148gr-prd--spc-HBWC-comm--spc-Match.aspx

Contact Bob Palermo over at Penn Bullets.  Bob makes a high quality product and is very knowledgeable on reloading.

http://www.pennbullets.com/32/32-caliber.html

http://www.cjncasting.com/

fc60 wrote:Greetings,

Ten ring groups can be had using the 0.314" H&N 100 grain Match Greased HBWC loaded in Lapua cases with 1.7 grains of Bullseye powder.


Dave

Hi Dave, I have searched the WEB and can't find a supplier for the H&N. Could you point me in the right direction

Hello everyone, I have a couple more questions. 

For Bullseye shooting do the projectiles need to be swaged?
What do I need to be doing/frequency for keeping the barrel clean of lead fouling?

Thanks so much for the replies.

Paul

H&N bullets are available from Canada...

Cibles Canada Targets
181 St-Henri
Gatineau ( Hull ), QC
J8X 4J6
Tel. 819-778-8857
Fax. 819-778-2647
Web www.targets.ca


They do ship to the US

Bad News.

I got an email from Jocelyn Langois of Cibles...

"we have received very little quantity due to the German new law, for exporting bullet of all kind. We need to apply for special license. We have in stock the .311, 312, 313."

It may be a while before the 0.314" bullets return.


Cheers,

Dave