Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Aimpoint H-1 on Model 41

4 posters

Go down

Aimpoint H-1 on Model 41 Empty Aimpoint H-1 on Model 41

Post by schmeg 7/12/2014, 3:34 pm

Well, I broke down and bought an H-1 for my Model 41. It mounts nice and tight on the weaver mount. I haven't shot it yet,
but the quality of the optics and the dot is outstanding. My question is does it matter where the sight is mounted on the rail?
I can mount it mid way on the rail, or all the way in the forward position? Any advantages to either position based on hand position
vs bore axis in relation to the position of the sight? I would think the further out toward the front sight, the more shaking would be apparent.

schmeg

Posts : 12
Join date : 2014-03-04

Back to top Go down

Aimpoint H-1 on Model 41 Empty Re: Aimpoint H-1 on Model 41

Post by Wes Lorenz 7/12/2014, 5:01 pm

I ended up with mine so the rear of the H-1 is inline with the chamber. When the H-1 was was mounted on the rib tang over the slide, I could feel a vibration every shot. Didn't try it near the muzzle.
Hope this helps.

Wes Lorenz

Posts : 426
Join date : 2011-06-28
Location : Washington

Back to top Go down

Aimpoint H-1 on Model 41 Empty Re: Aimpoint H-1 on Model 41

Post by schmeg 7/12/2014, 7:55 pm

"was mounted on the rib tang", I assume you mean the furthest aft position where mine is now. I guess it makes sense to mount it in the middle position if you wanted to achieve the same balance as a full size aimpoint. Thanks.

schmeg

Posts : 12
Join date : 2014-03-04

Back to top Go down

Aimpoint H-1 on Model 41 Empty Re: Aimpoint H-1 on Model 41

Post by Larry Lang 7/13/2014, 2:28 am

Place the mass over your grip if you can. Follow the line of the grip
Larry Lang
Larry Lang

Posts : 198
Join date : 2011-06-10
Age : 84
Location : Frederickson, WA

Back to top Go down

Aimpoint H-1 on Model 41 Empty Re: Aimpoint H-1 on Model 41

Post by Steve B 7/13/2014, 3:58 am

I'd position the sight so the weight balance is to your liking.

Steve B

Posts : 622
Join date : 2011-06-16
Location : Elkhart, IN

Back to top Go down

Aimpoint H-1 on Model 41 Empty Re: Aimpoint H-1 on Model 41

Post by schmeg 7/13/2014, 4:04 am

Guess I'll try it in all positions and see what works best.

schmeg

Posts : 12
Join date : 2014-03-04

Back to top Go down

Aimpoint H-1 on Model 41 Empty Re: Aimpoint H-1 on Model 41

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum