Bullseye-L Forum
Would you like to react to this message? Create an account in a few clicks or log in to continue.

Which XTP load for Sig P210A?

4 posters

Go down

Which XTP load for Sig P210A? Empty Which XTP load for Sig P210A?

Post by zanemoseley Sun Mar 13, 2022 5:32 pm

My P210A slide is with Jon getting a full rail to accept an Aimpoint, will use a 9000SC or Patrol Pro. I've shot a bit of 115xt out of it but thinking the 124 or 147 may feel less snappy. What's your favorite XTP load for your P210A?

zanemoseley

Posts : 2597
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

Which XTP load for Sig P210A? Empty Re: Which XTP load for Sig P210A?

Post by RoyDean Sun Mar 13, 2022 8:48 pm

Oh, what a pity to put an ugly "coke bottle" (a 9000 - yes I know they are good - I just got one myself and Jon is working on something for me too) on the beautifully svelte P210A!

But, to address your question, I had very good results with 147JHP over 4.3 of Power Pistol, COAL 1.130. Crimp 0.375, which produced about 920fps. I tried both XTP and Zero JHP bullets - hard to tell the difference. For reference, in my iron sight gun with standard spring, etc., 4.5PP = 980fps, 4.7PP = 1,030fps.

But with a 9000 on the slide no doubt you will need more Ooomph!

I also tried Accurate #2. With same 147JHP bullets; 4.0 = 890fps from my gun.

YMMV!!!

RoyDean

Posts : 450
Join date : 2021-03-31
Age : 67
Location : OR/AZ/OH/Thailand

Back to top Go down

Which XTP load for Sig P210A? Empty Re: Which XTP load for Sig P210A?

Post by zanemoseley Sun Mar 13, 2022 8:52 pm

May go with the Aimpoint Patrol Pro on it with a single large ring, saves a couple ounces. The 9000SC could go on my backup 45 wadgun. Was looking at the XTP 147 pretty hard. Need to find more PP, I'm about out.

zanemoseley

Posts : 2597
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

Which XTP load for Sig P210A? Empty Re: Which XTP load for Sig P210A?

Post by zanemoseley Sun Mar 13, 2022 10:09 pm

Also to add, my CZ75 Accushadow is a superior 9mm irons pistol but the P210A is no slouch, just too light and snappy with stock irons. When the ruskies invade the CZ and custom AR will be at my side lol. This heavy P210A with full size dot will be a target queen.

zanemoseley

Posts : 2597
Join date : 2015-07-11
Location : Cookeville, TN

Back to top Go down

Which XTP load for Sig P210A? Empty Re: Which XTP load for Sig P210A?

Post by RoyDean Sun Mar 13, 2022 11:21 pm

Reminds me of that famous Abba song.

Target Queen, Target Queen. Dah, dee, da da dee, da da dee! Etc.

RoyDean

Posts : 450
Join date : 2021-03-31
Age : 67
Location : OR/AZ/OH/Thailand

Back to top Go down

Which XTP load for Sig P210A? Empty Re: Which XTP load for Sig P210A?

Post by tovaert Mon Mar 14, 2022 7:44 am

147 XTP w/3.4gr Alliant e^3 at 1.100" to 1.120". No crimp per se...just re-size top 0.1" of case. You may need to step up the charge a bit with the additional weight on the slide. Do a plunk test to see where the rifling on your pistol comes into contact. The Magnus and Zero 147 JHPs allow for longer bullet seating...the XTP does not.

tovaert

Posts : 297
Join date : 2018-11-28

hamdenman and RoyDean like this post

Back to top Go down

Which XTP load for Sig P210A? Empty Re: Which XTP load for Sig P210A?

Post by JIMPGOV Mon Mar 14, 2022 12:23 pm

147GR XTP OAL 1.142
VV330 4.2GR
WSF    4.0GR

124GR XTP OAL 1.142
VV330 4.8 VV330
WSF    4.8 GR

JIMPGOV

Posts : 598
Join date : 2011-09-27

Back to top Go down

Which XTP load for Sig P210A? Empty Re: Which XTP load for Sig P210A?

Post by Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum