Bullseye Powder Load for 45 155gr LSWC
4 posters
Page 1 of 1
Bullseye Powder Load for 45 155gr LSWC
Hi Gents
Looking for starting load for my 45acp revolvers using Magnus 155 gr LSWC. I have plenty of Bullseye powder on hand.
Thanks in advance for your help.
Looking for starting load for my 45acp revolvers using Magnus 155 gr LSWC. I have plenty of Bullseye powder on hand.
Thanks in advance for your help.
knightimac- Posts : 215
Join date : 2014-03-16
Location : Auburn, Pa
Re: Bullseye Powder Load for 45 155gr LSWC
This thread https://www.bullseyeforum.net/t6155-any-opinions-on-magnus-155-gr-lswc
Wobbley- Admin
- Posts : 4737
Join date : 2015-02-12
Re: Bullseye Powder Load for 45 155gr LSWC
4.6 works great with a 160 so should with a 155 as well if not bump it up a tenth
DavidR- Admin
- Posts : 3032
Join date : 2011-06-10
Age : 70
Location : NRA:Expert, Georgia
Re: Bullseye Powder Load for 45 155gr LSWC
Regardless of recoil, how is the accuracy of these light .45 bullets at 50 yards? Seems like there's not much bearing surface on them compared to 185gr and 200gr SWCs.
mpolans- Posts : 606
Join date : 2016-05-27
Similar topics
» Bullseye Powder 50y Load
» Need load data for 180gr LSWC
» Load recipes for the T&B .32 ACP, 60 gr LSWC bullet
» Load Data for Brazos 160gr LSWC
» Loads for 45 cal 155 LSWC and WST powder
» Need load data for 180gr LSWC
» Load recipes for the T&B .32 ACP, 60 gr LSWC bullet
» Load Data for Brazos 160gr LSWC
» Loads for 45 cal 155 LSWC and WST powder
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|